JonnyP

Well-Known Member

• Jan 23, 2014

• #1

I dont mean just undooing the nut n moving them. Is there a way on making my drivers side wiper go across another four inches..?

 

JonnyP

Well-Known Member

• Jan 24, 2014

• #2

Bump..

 

kes86

Active Member

• Jan 24, 2014

• #3

Is this for the Defender or Disco? Defender is wear in the mechanism or the adaptor causing slack in the one wiper. The TD5 mech is a different ratio to the up to TDi so the wrong mech may have been fitted.

 

JonnyP

Well-Known Member

• Jan 24, 2014

• #4

kes86 said:

Is this for the Defender or Disco? Defender is wear in the mechanism or the adaptor causing slack in the one wiper. The TD5 mech is a different ratio to the up to TDi so the wrong mech may have been fitted.

Click to expand...

Tis for my 200 disco. They dont seem slack, just the drivers side not going far enough over..

 

TD5power

Certified Nutter

• Jan 25, 2014

• #5

Thought there was a adjuster screw on them, my td5 fender did the same

 

Kwakerman

Well-Known Member

• Jan 25, 2014

• #6

Do they park OK (are they horizontal), if not that may suggest the arms are on the wrong spline?