I changed my wiper motor at the side of the road in about 20 mins on the way back from picking it up 
Scuttle panel off (the plastic bit) wiper arms off and the spindle nuts under em, 4 10mm bolts i think it was for the motor plate and 1 for the linkadge, cant remember much really it was well easy though.
J reg 200 TDi
Scuttle panel off (the plastic bit) wiper arms off and the spindle nuts under em, 4 10mm bolts i think it was for the motor plate and 1 for the linkadge, cant remember much really it was well easy though.
J reg 200 TDi
Disconnect the wiper motor multi-way plug BEFORE touching anything.
Peter
Peter
