22pelletpete
Member
I am fitting mortice deadlocks to the doors of a 2007 puma defender 110 van .How do I remove the window winder handle so that the lining can be removed? The manual I have only details electric windows.Advice much appreciated.Pete
Rawly86
Active Member
You may be best to go and introduce yourself first.
Introduce Yourself - Land Rover Zone
You'll probably get a better response.
:welcome2:
Introduce Yourself - Land Rover Zone
You'll probably get a better response.
:welcome2:
Welcome Pete (if that's ya name) 
I don't have a pic, which is unusual! The winder pushes on to splines on a metal spindle that sticks out through the door card. If I remember correctly, if you pull the door handle out from the door card a bit you can see the circular sprung wire loop that clips in on to the spindle. A bit like a wire circlip. You can push a screwdriver in and pop it off.
I don't have a pic, which is unusual! The winder pushes on to splines on a metal spindle that sticks out through the door card. If I remember correctly, if you pull the door handle out from the door card a bit you can see the circular sprung wire loop that clips in on to the spindle. A bit like a wire circlip. You can push a screwdriver in and pop it off.
aaronmorris
Head's a shed
Welcome Pete (if that's ya name)
I don't have a pic, which is unusual! The winder pushes on to splines on a metal spindle that sticks out through the door card. If I remember correctly, if you pull the door handle out from the door card a bit you can see the circular sprung wire loop that clips in on to the spindle. A bit like a wire circlip. You can push a screwdriver in and pop it off.
Haha, sounds easy when you say It like that.
aaronmorris
Head's a shed
22pelletpete
Member
Welcome Pete (if that's ya name)
I don't have a pic, which is unusual! The winder pushes on to splines on a metal spindle that sticks out through the door card. If I remember correctly, if you pull the door handle out from the door card a bit you can see the circular sprung wire loop that clips in on to the spindle. A bit like a wire circlip. You can push a screwdriver in and pop it off.
thanks for that info I'll try tommorrow.ATB Pete
