Hi,
I believe you can get to the pump by just removing a panel at the rear of the bumper immediately behind the washer bottle area at the bottom of the wheel arch.
Griff
mine doesnt work either but its not an MOT issue so have left it, let me know if this easy way of replacing it works!
Hi,
It's off this site
Allbrit.de - Ersatzteile für LAND ROVER & MG ROVER
Shows front and rear as same part no. DMC1005500 but h/lamp washer pump different
Griff
pull mout the switch , unplug it and bridge the pins in the connector, the green/light green(pin 1) and light green/grey(pin4) wires, see attachment to identify pins...if no joy we'll speak then[/QUOT
Thanks...will do it tomorrow night and let you know.