Skiddy 1

New Member

• Feb 25, 2025

• #1

Hi guys I can't get to the bolt to loosen the glass, as it won't go down. Any solution to this cheers.

 

GrumpyGel

Well-Known Member

• Feb 25, 2025

• #2

You don't say which window?

You can cut the wires, make sure the glass doesn't fall down though.

 

kernowsvenski

Well-Known Member

• Feb 25, 2025

• #3

I've often found that despite a broken cable and utterly chewed up mechanisms, operating the switch for a bit allows some slack to then slide the glass down by hand. In my most recent regulator swap I even had to press the switch up for a couple of seconds to do it, despite the window being fully raised.

 

Skiddy 1

New Member

• Feb 26, 2025

• #4

GrumpyGel said:

You don't say which window?

You can cut the wires, make sure the glass doesn't fall down though.

Click to expand...

Cheers, it's the near side back window.

 

Skiddy 1

New Member

• Feb 26, 2025

• #5

kernowsvenski said:

I've often found that despite a broken cable and utterly chewed up mechanisms, operating the switch for a bit allows some slack to then slide the glass down by hand. In my most recent regulator swap I even had to press the switch up for a couple of seconds to do it, despite the window being fully raised.

Click to expand...

Cheers