matt harvey

New Member

• Jul 9, 2008

• #1

as per title, i want to put a winch on the front of my disco1 but dont want a winch bumper, is there anyway to fit one with the original bumper onto the chassis without welding if pos? also what size would you say to move a car or to pull my disco?

 

hughesy

Well-Known Member

• Jul 9, 2008

• #2

On my 110 I had a winch mount that fitted on top of the standard bumber and was fixed using the same bolts as the bumper. Would have thought you could adapt a disco bumper and or fabricate something but it's probably way less hassle to buy a purpose built bumper. As for winches go for the most powerful you can afford. Imagine a 2 ton disco stuck up to it's axles in lovely claggy mud, then imagine the force needed to yank it out

 

MundyBoy

New Member

• Jul 9, 2008

• #3

you could fit a discreet winch mount, bearmach do them i think, or make your own.

http://www.bearmach.com/partscatalogues/accessory_cats/discovery.pdf

 

Pikey

Dummy Ejection Facilitator..

• Jul 9, 2008

• #4

Or just buy a good tirfor & cable, Hi_lift and a length of chain. less likely to get your landy stolen, doesn't flatten your battery, Isn't limited to just one vehicle (winch is no good if there a couple of vehicles between you and the stuck vehicle and you can't reach it) and a fraction of the cost of a winch & winch bumper.

 

shocker

Well-Known Member

• Jul 9, 2008

• #5

has anyone access to a template or drawings for a tray or winch bumper for self fabrication,please?Even for sale?

 

S

si67

New Member

• Jul 14, 2008

• #6

i have a discreet winch tray from a disco 2, it's kicking around in the garage, am in manchester.
got rid of the disco cos when even the aircon is run by a computer it's just way too much technology, now drive a lightweight with a 300 tdi and the only electronics in my lanny is the mobile phone in my pocket.

 

D

Dave 2000

Active Member

• Jul 16, 2008

• #7

Contact Golddigger 4x4 golddigger4x4 - ENGINEERING AND FABRICATION they will sell you a winch plate that bolts in, give them details of your winch and it comes with the holes drill ect.

Cut a slot in the front bumper for hook and cable and cover it by hinging your number plate.

Done and sorted.

regards

Dave

 

Griffdowg

New Member

• Jul 16, 2008

• #8

i bought a winch which came with a plate for a disco. sold it on ebay, it went for 30quid keep your eye out, these things do come up. it looked like it used the same wount system as a steering guard for a defender. you could easily use 2 of these and weld a tray in between.

have a look on here for photos by Fishface220 i think it is, hes based in Bristol and i got my winch and tray off him.

i would suggest going for a 9.5k or 12k winch. make sure you also get the cable'ing right as this can sap power and reduce the performance of your winch. no good having a 12k winch with a narrow long wire from your batt!

G

 

Griffdowg

New Member

• Jul 16, 2008

• #9

got curious...

here you go: http://www.landyzone.co.uk/photopost/showphoto.php?photo=5178&cat=500&ppuser=1628

G

 

matt harvey

New Member

• Jul 17, 2008

• #10

somethin like this? Discovery Winch Tray on eBay, also, Land Rover, Car Parts, Cars, Parts Vehicles (end time 20-Jul-08 21:30:06 BST)