roverjim · Aug 30, 2009

hi hope someone can help i want to put a winch on my series 111 all the bumpers i see for sale are for defenders will this fit my series 111. cheers

steve2286w · Aug 30, 2009

The capstan winches fit straight to standard bumper look good too

roverjim · Aug 30, 2009

hi thanks for that but i want a winch i can use on my own

Pikey · Aug 30, 2009

roverjim said:
hi thanks for that but i want a winch i can use on my own

And you wouldn't be able to use a capstan winch on your own because???

roverjim · Aug 30, 2009

redhand if you have ever tried to use a capstan on your own you would know why

Sean · Aug 30, 2009

roverjim said:
redhand if you have ever tried to use a capstan on your own you would know why

go on tell us

wondering where i have been going wrong now ........

Pikey · Aug 30, 2009

start engine. use hand throttle to increase revs slightly.

Throw lever on capstan

Chuck a loop of rope around capstan.

Take strain.

Piece of ****.

G-man · Aug 30, 2009

just gotta remember to throw the loop the right way

roverjim · Aug 30, 2009

your right what you call yourself on the bottom of your page

Sean · Aug 30, 2009

what no safety monitoring official standing by ?

G-man · Aug 30, 2009

roverjim said:
your right what you call yourself on the bottom of your page

????

i have used a capstan on me own before it were to pull an old spreader out of a hedge

Sean · Aug 30, 2009

G-man said:
????

i have used a capstan on me own before it were to pull an old spreader out of a hedge

did you carry out a dynamic risk assesment first ?

roverjim · Aug 30, 2009

how many arms you got sean?

TheVengefulElephant · Aug 30, 2009

rover jim did you just call him a cun't! that's not very nice

Sean · Aug 30, 2009

roverjim said:
how many arms you got sean?

2

it's just dawned on me that DJ might just have the 1 arm, maybe that'd explain his question and why he thinks 2 peeps (or 2 arms) are needed to operate a caps winch

DJ if you've just got the 1 arm i'm sorry for assuming you were a numpty

G-man · Aug 30, 2009

Sean said:
did you carry out a dynamic risk assesment first ?

aye i looked at the spreader though thats gotta be shifted, then i got a gert big rope tied it to the hitch, made a double loop round the capstan set me revs on me hand throttle popped the transfer box in neutral stuck the main box in 2nd, pulled the lever on the capstan and then took the strain

it was a hydraulic capstan on a series 2a hence the gear selection

Pikey · Aug 30, 2009

roverjim said:
your right what you call yourself on the bottom of your page

Let me see if I've got this right. I can use a capstan winch without needing any help. You can't? and that makes me the Cuunt. Ya logic is impeccable

Sean · Aug 30, 2009

G-man said:
aye i looked at the spreader though thats gotta be shifted, then i got a gert big rope tied it to the hitch, made a double loop round the capstan set me revs on me hand throttle popped the transfer box in neutral stuck the main box in 2nd, pulled the lever on the capstan and then took the strain

it was a hydraulic capstan on a series 2a hence the gear selection

that's what we like to see - good man pike !

roverjim · Aug 30, 2009

not very nice but true. lmfao

G-man · Aug 30, 2009

don't get me started on H&S ........ we don't see eye to eye

New Member

Well-Known Member

New Member

Dummy Ejection Facilitator..

New Member

Banned

Dummy Ejection Facilitator..

BBQ king

New Member

Banned

BBQ king

Banned

New Member

Well-Known Member

Banned

BBQ king

Dummy Ejection Facilitator..

Banned

New Member

BBQ king

Similar threads