andyfox2005
Active Member
Just thinking about fitting a de cat pipe i already have egr blanking plate want a bit more guts and mpg
jamesmartin
Well-Known Member
just get defender non cat down pipe ,jacking chassis away from axle helps fitting
sible88
New Member
Don't think he has a problem finding a pipe that will fit he wants to know if it will pass MOT without!!!
Soloby Rob
Banned
Yes! it will pass the smoke test without a cat. 
Big Stu 12
Well-Known Member
Yes it will def, I ve had mine pass an MOT with a decat
wiltshire landyman
I’m back
my fender with a 300 tdi straight thru eggsauce passed mot
Philip0603
New Member
Used a Defender down pipe on mine,easy to fit, just pass through from the front. Been through two MOT's no problem. One of the cleanest diesels my mot tester has seen, gets results as good as the modern stuff with all their complexity. Fairly sure that it will be OK next year when the rules change
andyfox2005
Active Member
Cheers guy just clicked buy it now £14.99 ebay
discool
Well-Known Member
Your emissions are not tested CO & HC as in a 'petrol engine' only a smoke test is done so as stated in the above poste no probs
andyfox2005
Active Member
Where can you get the quantity of jungle juice to power this beast 21 mpg if im behaving my self
RichM
Well-Known Member
I usually get it from Makro in 20 litre containers. Works out at just under £1.00 a litre.
People always find it amusing when they see me pouring it into my tank in the car park. The reality is that they're the joke considering they're the ones who are willing to pay £1.40 a litre to fill up their tanks!
People always find it amusing when they see me pouring it into my tank in the car park. The reality is that they're the joke considering they're the ones who are willing to pay £1.40 a litre to fill up their tanks!
Last edited:
andyfox2005
Active Member
Any problems in cold weather using oil or do you add something
Choppertrash
New Member
If you want more power/throttle response, tweak the pump..........it is very easy, with no real specialist tools needed. I just did mine, using this guide, and it made a big difference.......feels like a new motor.
Just follow theses steps (be careful not to lose the little rubber segments under the throttle position sensor when its removed)
http://www.landyzone.co.uk/lz/f8/sluggish-disco-not-any-more-146991.html
Just follow theses steps (be careful not to lose the little rubber segments under the throttle position sensor when its removed)
http://www.landyzone.co.uk/lz/f8/sluggish-disco-not-any-more-146991.html
mud muppet
New Member
andyfox2005
Active Member
Where did you hear that and nice job machine polishing i do it for a living and that looks good
didnt think doozils hat cats fitted
