Has anyone seen this before.....

I noticed my heaters weren't blowing as i expected and after searching the forum i checked the blower and relays to find the relay wasn't even in the fuse box and the resitors had failed in the passenger side blower. So a new relay and a second hand blower of ebay and everything is running lovely and the book light has gone from the HEVAC.

Sorted i thought..........well i thought i would test it....... set both sides to low and lovely cold air and with a lot of force came out of the vents. So i then cranked it up to High (yes once the engine was warm...lol) and the air went warm not hot so i lowered the heat down to lo again and the passenger side went ice cold but the blowers on the drivers side were warm and then the book re appeared on the HEVAC.

So no cool air i thought for the driver but after i had stopped for approx 15 mins and restarted the car the book had disappeared and cold air out of the drivers side.

Has anyone seen this before and know the fix???

Cheers

Blend Motors I guess - do a site search on here loads of posts on testing and/or fixing them...

As Saint says + good read here: Range Rover P38 Maintenance repair improvements and tips learned by experience by ownership.

Polen filters?
AC?

Blend flap sticking, needs eightinavee's mod by the sounds of it.

cheers guys will start to investigate this one now..... on the plus side the list is getting smaller ......

Jelleyman said:

cheers guys will start to investigate this one now..... on the plus side the list is getting smaller ......

Click to expand...

The list does start to get smaller in the end, and you will end up with an almost perfect P38

anorakmark said:

The list does start to get smaller in the end, and you will end up with an almost perfect P38

Click to expand...

No! It just starts all over again

i can imagine...... but hey ho the love of owning a RR lol