jackstringer
Active Member
If you look closely at the glass you will see there are thing strips of wire in the glass. They heat up when you turn on the window heating element.
On some aftermarket windscreen glass they only put heating elements on only half the window (drivers side).
How thick are the strips?
On some aftermarket windscreen glass they only put heating elements on only half the window (drivers side).
How thick are the strips?
DEFENDER90-DAZ
New Member
Sounds like its only every other bar thats getting power
discool
Well-Known Member
I have a stone chip that now gives me a 4inch vertical band of uncleared glass, not that it's a problem, my heater clears the windscreen in two minutes on a frosty morning that's quicker the the heatered screen can do.
A D1 screen has two elements so unless the screen is damaged check the supply to the side thats not clearing..
A D1 screen has two elements so unless the screen is damaged check the supply to the side thats not clearing..
Last edited:
sierrafery
Well-Known Member
Check for voltage at both plugs with switch pushed and if there is u can't do else than replace the windscreen
Discodave2011
Active Member
Just had mine done last week, cost £75 ( policy excess ) fitted by autoglass, guy did a great job. All i need now is the switch & relay then i'll be in business.
