tomcat59alan
Well-Known Member
A photo would hep.
tomcat59alan
Well-Known Member
Is it or has it ever been on LPG? could have been the mounting for a Flashlube system.
Zorro587
Active Member
It is on LPG at the moment, and was (on a different system) when I bought it. Didn't pay too much attention to what was part of that install as it was old and rubbish. The main contribution it (the old system) made was having a rigid filler pipe which, along with 2 cable ties, was the only thing holding the rear bumper in place.
Update on the job: I've got the LH head off and I would gladly part with a kidney to get the RH one off. One bloomin' bolt won't budge for love, money or promise of a kidney.
Update on the job: I've got the LH head off and I would gladly part with a kidney to get the RH one off. One bloomin' bolt won't budge for love, money or promise of a kidney.
tomcat59alan
Well-Known Member
Put in your location, if money is involved.It is on LPG at the moment, and was (on a different system) when I bought it. Didn't pay too much attention to what was part of that install as it was old and rubbish. The main contribution it (the old system) made was having a rigid filler pipe which, along with 2 cable ties, was the only thing holding the rear bumper in place.
Update on the job: I've got the LH head off and I would gladly part with a kidney to get the RH one off. One bloomin' bolt won't budge for love, money or promise of a kidney.
It is on LPG at the moment, and was (on a different system) when I bought it. Didn't pay too much attention to what was part of that install as it was old and rubbish. The main contribution it (the old system) made was having a rigid filler pipe which, along with 2 cable ties, was the only thing holding the rear bumper in place.
Update on the job: I've got the LH head off and I would gladly part with a kidney to get the RH one off. One bloomin' bolt won't budge for love, money or promise of a kidney.
Breaker bar and easy does it. I split one socket trying.
Crap sockets?
It was an old Halfords one. So old in fact that it didn't even have Halfords written on it. I took it back as they say lifetime guarantee these days but he said I couldn't prove it was a Halfords one. Fair enough. So went online and bought a replacement. Cannot remember the make but they got a decent write up. Chinese sounding name. Teng?
Zorro587
Active Member
Yep done that too......
Teng are good and Swedish.
They're Swedish? Guess it is harder to fit Anderstrømsonsonson round the socket without going down to a 6 point font.
Zorro587
Active Member
Update: The heads are off and ready to go for checking/skimming.
That's it? Oh, if only dear reader. The first 19 head bolts came out a treat. The LH head was off Sunday morning. Odyssey came round and we shared ownership tales of coolant loss and head gaskets. He left about lunch.
This evening at 16.55, four and a half days later, I got further.
Bolt number 20 decided to mess around with my head. It was the one at the back of the RH head which lives just below where the heater pipes come through the bulkhead. And it started to round off. Right, need to make special Tool No.1 to try and keep the socket applying downward pressure onto the bolt head. Monday evening saw the fabrication of ST No.1 but it was a failure. I had already pre-empted some woe though and had ordered a new deep socket from Hebay. It'll be here Tuesday or Wednesday.
Tuesday didn't fill me with glee as the postie had passed our house by. "I'll check the approximate delivery date again" thought I, but logging onto my purchase history on Hebay found ...... nothing. No sign of said socket being bought. But I've had an email from Paypal. Checked the email to find I had indeed paid for it, but what I'd missed on Sunday was that No.1 son, the first in line to the family overdraft, had been logged into the Hebay when I did the clicking thing....and the socket was being delivered to his girlfriend's flat.
She lives in London. bu99er.
Once the mushroom cloud of my ire had subsided, No.1 son informed me that she was driving up on Wednesday anyway and would bring it with her. This was a lie but No.1 son went behind my back and drove halfway to the moon to meet said girlfriend and retrieve my socket.
Last night at 10.15 he returned and presented the socket to me. No time like the present. And still no good. Right, sleep is for wimps.
Plan B: use an assortment of drills from 4mm - 10mm, weaken the head and shear it off flush. Lots of careful drilling ensued but the head refused to shear. Sleep came at 02.45 this morning.
Screwfix happened at 16.15 this afternoon and having been relieved of some cash at bayonet point I was presented with a shiny new set of Irwin broken/rounded/generally knackered removal sockets, the largest of which is 16mm.
A judicious application of caffeine and nicotine was followed by a 'crack', a loose head and the remains of a head bolt that could be unscrewed by hand.
I will sleep well tonight and tomorrow plan to verily skip to the head sorter-outerers.
Update will follow.
(Also noticed the sun seems to be out longer and stronger since my cloud generator has been parked up. Coincidence?)
That's it? Oh, if only dear reader. The first 19 head bolts came out a treat. The LH head was off Sunday morning. Odyssey came round and we shared ownership tales of coolant loss and head gaskets. He left about lunch.
This evening at 16.55, four and a half days later, I got further.
Bolt number 20 decided to mess around with my head. It was the one at the back of the RH head which lives just below where the heater pipes come through the bulkhead. And it started to round off. Right, need to make special Tool No.1 to try and keep the socket applying downward pressure onto the bolt head. Monday evening saw the fabrication of ST No.1 but it was a failure. I had already pre-empted some woe though and had ordered a new deep socket from Hebay. It'll be here Tuesday or Wednesday.
Tuesday didn't fill me with glee as the postie had passed our house by. "I'll check the approximate delivery date again" thought I, but logging onto my purchase history on Hebay found ...... nothing. No sign of said socket being bought. But I've had an email from Paypal. Checked the email to find I had indeed paid for it, but what I'd missed on Sunday was that No.1 son, the first in line to the family overdraft, had been logged into the Hebay when I did the clicking thing....and the socket was being delivered to his girlfriend's flat.
She lives in London. bu99er.
Once the mushroom cloud of my ire had subsided, No.1 son informed me that she was driving up on Wednesday anyway and would bring it with her. This was a lie but No.1 son went behind my back and drove halfway to the moon to meet said girlfriend and retrieve my socket.
Last night at 10.15 he returned and presented the socket to me. No time like the present. And still no good. Right, sleep is for wimps.
Plan B: use an assortment of drills from 4mm - 10mm, weaken the head and shear it off flush. Lots of careful drilling ensued but the head refused to shear. Sleep came at 02.45 this morning.
Screwfix happened at 16.15 this afternoon and having been relieved of some cash at bayonet point I was presented with a shiny new set of Irwin broken/rounded/generally knackered removal sockets, the largest of which is 16mm.
A judicious application of caffeine and nicotine was followed by a 'crack', a loose head and the remains of a head bolt that could be unscrewed by hand.
I will sleep well tonight and tomorrow plan to verily skip to the head sorter-outerers.
Update will follow.
(Also noticed the sun seems to be out longer and stronger since my cloud generator has been parked up. Coincidence?)
What socket have you been using on your head bolts. They are NOT 16 mm they are 5/8" AF. If you used a 16 mm twelve point socket, knackering bolt heads up on any that are tight is assured. You MUST use 5/8" AF single hex sockets on these at all times.
tomcat59alan
Well-Known Member
Typical cheap Yorkshire bodge. Spend some money and sort it properly.I'd have just stuck a bottle of K-Seal in it and seen what happened
Zorro587
Active Member
I've got 6 and 12 point sockets. I never use the 12's on anything tight. Lesson learned many years ago.
