T

Td300

New Member

• Sep 4, 2010

• #1

Hi, I'm Benedikt and new to this forum

Does anyone of you have pictures of how the Rear Hoop on Whitbread's Green Lane / Hard / Soft Top Rollcages is fitted to the chassis?

Got my cage at home and Im pretty sure there are some parts missing :doh:

Cheers!

 

Griffdowg

New Member

• Sep 4, 2010

• #2

my full external runs through the tub bolted to another bendy bit of metal. this then goes down through the tub floor and fixed to the cross member

 

T

Td300

New Member

• Sep 4, 2010

• #3

Sorry, the 'rear hoop' on the Green Lane one is of course the middle hoop on the hard top version.
Got pictures of how it runs to the chassis behind the seats?

 

123-eddy09

Active Member

• Sep 4, 2010

• #4

Don't you bolt a plate to the chassis rail. Then weld the hoop to that.

 

T

Td300

New Member

• Sep 4, 2010

• #5

One picture would make my day

 

Griffdowg

New Member

• Sep 5, 2010

• #6

mine is a 4 point so not mounted behind the seats, but the set up is much the same. it bolts to a section that runs down through the floor and onto the fuel tank outriggers.

G

 

T

Td300

New Member

• Sep 18, 2010

• #7

I made a picture of one of the two parts I have left to fit the rear hoop.

Are at least these right, or do I need completly different parts?

 

Attachments

• 
  2010-09-15_18-28-02_805.jpg

  31.5 KB · Views: 151