richard critchley

Member

• Sep 4, 2016

• #1

any help please noise come from around gearbox when driving slow
think it the thrust bearing cause when you press the clutch the noise goes away
am i thinking on the right lines ?

cheers

 

Magicgrotto

Well-Known Member

• Sep 4, 2016

• #2

YEP ! sounds like it !

Steve

 

richard critchley

Member

• Sep 5, 2016

• #3

Cheers Steve better asking the question and being right eh ? Lol

 

Magicgrotto

Well-Known Member

• Sep 5, 2016

• #4

Hi Richard
I take it the noise goes when you just rest your foot on the clutch ?

Steve

 

richard critchley

Member

• Sep 5, 2016

• #5

Yeah u got it in one who u think is best place get a thrust bearing from

 

stpaulinus

Well-Known Member

• Sep 5, 2016

• #6

Best bet is to take it for aspin, stop after 200 yards and ask the wife to get out! Start down the road if no whinning then problem found!!!!!!

 

Magicgrotto

Well-Known Member

• Sep 5, 2016

• #7

If it were mine I would put complete clutch in richard ! No good taking apart then finding plate or pressure plate gone
When I did mine plate good as new pressure plate crakerd but had the same noise before I striped it down & slightly slipping

Steve

 

Magicgrotto

Well-Known Member

• Sep 5, 2016

• #8

stpaulinus if ONLY it were that SIMPLS

 

richard critchley

Member

• Sep 5, 2016

• #9

lol if only that simple stpaulinus and cheers ste gonna get a complete kit and get it done

 

Dippypud

Never Knowingly Understood

Full Member

• Sep 5, 2016

• #10

richard critchley said:

lol if only that simple stpaulinus and cheers ste gonna get a complete kit and get it done

Click to expand...

Get the spigot bush too, it's a couple of quid and is a job done.... (soak it well first tho)....

 

Magicgrotto

Well-Known Member

• Sep 5, 2016

• #11

Dippypud said:

.. (soak it well first tho)...

Click to expand...

That's how baby's are made in it ? leaving it in to soak ! Hahahahahaha

 

IamRobbie

Well-Known Member

• Sep 5, 2016

• #12

Complete kit if your taking it all apart. I've just changed the spigot in mine 10 minutes ago and it was really easy with grease and a tight socket to get it out. Getting it in was just as easy after soaking it in oil. Good luck