Nigel888

Member

• Mar 5, 2012

• #1

I have seen several tubular bumpers that sit higher that the chassis rails, the nicest seem to have the ends angled up.

Are these available or are they modified.

I will be fitting a full size inter cooler at some time but do not have air-con. Approach angle is not key but I want to keep things as tight in as possible as it looks better.

Being a hybrid 100" I assume rock sliders are going to be interesting to find.

I have also seem rear bumper/tow bars that are tubular as well.

Anyone on here make this stuff ?

 

-Defender110-

Well-Known Member

• Mar 5, 2012

• #2

As regards the tubular front and back bumpers, id be interested to know if people on here fab these as well...pressbrake??

 

pressbrake

Well-Known Member

Forum Sponsor

• Mar 5, 2012

• #3

-Defender110- said:

As regards the tubular front and back bumpers, id be interested to know if people on here fab these as well...pressbrake??

Click to expand...

I make everything for landrovers and prefer one off stuff.

 

-Defender110-

Well-Known Member

• Mar 5, 2012

• #4

Ok cool, so if i were to make up a 3d model on CAD and give you drawings to work off of you would be happy enough to work from that?
That would be handy as i would probably have specific design ideas in mind

 

pressbrake

Well-Known Member

Forum Sponsor

• Mar 5, 2012

• #5

-Defender110- said:

Ok cool, so if i were to make up a 3d model on CAD and give you drawings to work off of you would be happy enough to work from that?
That would be handy as i would probably have specific design ideas in mind

Click to expand...

That is my prefered method, especially if you use accurate measurements not artistic interpertation

 

-Defender110-

Well-Known Member

• Mar 5, 2012

• #6

Yeah im fairly handy with solidworks and the likes, so will probably do that. do you have the software to open the files or would pdf's of drawings suit better?

 

pressbrake

Well-Known Member

Forum Sponsor

• Mar 5, 2012

• #7

-Defender110- said:

Yeah im fairly handy with solidworks and the likes, so will probably do that. do you have the software to open the files or would pdf's of drawings suit better?

Click to expand...

pdf format please

 

M

MrPDude

Active Member

• Mar 6, 2012

• #8

Go to Google and search for mib offroad. They do everything you need. Very high quality stuff for pretty good prices!

 

H

hutchie

New Member

• Mar 6, 2012

• #9

pressbrake said:

I make everything for landrovers and prefer one off stuff.

Click to expand...

looking through your site , ur gear looks awsome pal how much are those tubes that go round the sides of the bonnet? i have a defender 90 n woukd like it in orange