chrispy

chrispy

Active Member
I've just managed to convince the wife to let me put a bull bar on the Disco but she's insisting on the smaller plastic ones that came with Land Rovers. Will one of these fit a facelift TD5, also what do I need to be looking for? Will it just bolt straight on or does it need a mounting kit?

As always, thanks in advance my friend.
 
had a chrome a frame on mine havent got round to puting it back on after bump. There are brackets for end of chassis rails and holes cut in bumper. Looks better than the soft a frames.
 
I wanted a chrome one but the wife has put her foot down......so I found a place on eBay (based in Poland) that make briliant chrome ones and can be painted to the colour of your choice. She's all about colour coordination and doesn't fancy the silver shining through due to it being a dark vehicle (Epsom Green). I don't want a massive one, just one low enough to not reach the level of the bonnet, maybe to the bottom of the headlights would be good.
 
discool said:
Only two from Land Rover parts listed. Protection bar STC50020, A-frame STC50021
Click to expand...

That's the one she likes, the A-frame STC50021. Only one on eBay and it has to be collected from Liverpoolwhich is way too far away from me. Need one local to Wales or willing to post. Will that one fit a facelift D2?
 
plastic ones are pretty rare now, i got a new 1 off ebay 12 month ago, have put brackets on, had to take bumper off to get em on so waxoyled all front whilst it was off, still havent got round to putting bar on thou

the 1 on ebay, says organise your own courier, parcels to go!
 
Last edited:
Yes, the one on eBay looks a bit ****ty to be honest. Shame there's no more new/old stock about. I think i've talked the wife into a proper one now.
 
We've chucked both of ours away off our V8's. By the time people hang two bl**dy great Wipac spots on the front, oil cooler, gearbox oil cooler, air con radiator as well, it's no wonder they had overheating problems!

Look far better without IMO.

Peter
 
Sounds good, you've been a great help my friend. What price would you suggest I go to for it? Don't want to overspend obviously.
 
Hi all, i have been looking for a large chrome Bull Bar for my Face lift TD5 04 for the past year!!! New or used as long as its in good condition. Can anyone help me.
 
You must log in or register to reply here.

Similar threads

J
Disco 2 Has anyone used a TD5 with the M&D kit for an MT82
Replies
12
Views
2K
MJI
MJI
Discodevon
Purchased a bull bar, are they a pain to fit?
Replies
13
Views
926
Discodevon
Discodevon
gstuart
Disco 3 (LR3) Front A bar repair
Replies
2
Views
491
gstuart
gstuart
Tango91
Disco 2 D2 TD5 foolproof solo clutch bleeding for dummies
Replies
12
Views
3K
tilly2
T
dag019
LED spotlight recommendations
Replies
2
Views
851
Knappster
Knappster