Psyney1974

Psyney1974

Member
Hi, Bought my first Defender 90 3 weeks ago and I'm loving it but that huge jack is a right pain!! lol

Is there a padded bag you can get for it or is there a place to put it that could potentially save my dogs life? :);)
 
There's a purpose designed clip (rubber band) and keep behind the front seats on the rear bulkhead
 
The standard jack is one of the most rubbish items supplied by JLR. Most use a bottle jack with a cup to fit under the axle, one from a early disco is good. and will fit behind seat.
If as above a HI lift we will have to think again.
 
Got my bottle jack robbed from an early disco in the front on the floor between handbrake and gearbox tunnel
 
Psyney1974 said:
Hi, Bought my first Defender 90 3 weeks ago and I'm loving it but that huge jack is a right pain!! lol

Is there a padded bag you can get for it or is there a place to put it that could potentially save my dogs life? :);)
Click to expand...

So I would assume you mean you have a hi lift jack at the moment. But please clarify.
A std LR bottle jack is a good thing to have. But they are not cheap, so if you know of someone breaking an old Disco then ask them niceley...

Cheers
 
As others have said, get a bottle jack made for axle lifting. The Discovery ones are perfect for this of course, I picked mine up for £15 at an auto jumble.
 
neilly said:
So I would assume you mean you have a hi lift jack at the moment. But please clarify.
A std LR bottle jack is a good thing to have. But they are not cheap, so if you know of someone breaking an old Disco then ask them niceley...

Cheers
Click to expand...
Sorry, yes, its a high lift jack. Im going to have a look tomorrow to see if it will go behind the seats
 
Psyney1974 said:
Its a high lift one, is that not the original?
Click to expand...
This is a Hi Lift jack, Hi Lift is a brand name, the generic term might be a farm jack:
838996A2-7433-4F33-825E-7A274DCE7415.png

This is the original Defender jack:
E846D58A-17AE-40C7-B8E7-B56DB8B9C20F.jpeg

Either way, a bottle jack is far superior for wheel-changing in an ordinary scenario I.e on road rather than off road.
 
A Hi-Lift is not the tool for lifting the vehicle to change a wheel. I've had one for nearly 30-years but it never goes in the vehicle, it sits in the shed until I have a job for it in the garden (great for lifting / pulling stumps).
The LR pillar jack that slots into the chassis holes is a bit of a faff (why lift the vehicle when you only want to lift the wheel a few inches off the floor?).
As others have said far better to get the Disco bottle jack or the older LR screw jack (that is what I have and I love it).
 
Litch said:
A Hi-Lift is not the tool for lifting the vehicle to change a wheel. I've had one for nearly 30-years but it never goes in the vehicle, it sits in the shed until I have a job for it in the garden (great for lifting / pulling stumps).
The LR pillar jack that slots into the chassis holes is a bit of a faff (why lift the vehicle when you only want to lift the wheel a few inches off the floor?).
As others have said far better to get the Disco bottle jack or the older LR screw jack (that is what I have and I love it).
Click to expand...
Mine gets used solely for landscaping jobs, in fact I used it yesterday to lift up a close board fence section in situ, to remedy some sagging. They can be useful off roading, but I’ve never used one on the Landy in 8years of ownership!
 
Good for getting tyres off the bead, pulling posts, as an extra large clamp/spreader, even lifting the stable back onto its footing after hold down straps rotted and wind moved it off a couple of feet.:)
 
I have the Land Rover screw bottle Jack, it fits in the compartment to the side of the battery box under the passenger seat.

I also keep in there a basic tool kit and spare lightbulbs etc
 
You must log in or register to reply here.

Similar threads

B
Returning to the fold
Replies
3
Views
571
brianp38dse
brianp38dse
stumpyj
(2000 TD5 90 defender)TD5 Fuel Pump
Replies
4
Views
361
stumpyj
stumpyj
dag019
The value of parts
Replies
10
Views
448
dag019
dag019
H
2.5TD where to mount center exhaust bracket
Replies
10
Views
1K
dag019
dag019
M
Def 90
Replies
6
Views
570
brianp38dse
brianp38dse