S

sprie

Active Member

• Jul 1, 2024

• #1

Ref the rear light cables, the loom has the connectors (double connectors on the drivers side to support tow bar electrics), do I join the light fittings to the connectors below the vehicle or do I somehow squeeze all the connectors through the hole and have the joins “in” the tub (i.e. in the corner that you can see in the photo)?
The cables are long enough for either option to be done.

 

Attachments

• 
  PXL_20240701_095603521.jpg

  313 KB · Views: 78

Flossie

Well-Known Member

• Jul 1, 2024

• #2

In the tub .
You could also drill another hole with a rubber grommet if you like.

 

miktdish

Guns n Chainsaws

Full Member

• Jul 1, 2024

• #3

In the tub ... like wot @Flossie said ...

 

H

Hicap phill

Well-Known Member

• Jul 1, 2024

• #4

In the tub… you will be dry & warm when problem sorting

 

L

lynall

Well-Known Member

Full Member

• Jul 1, 2024

• #5

Make sure there is some spare wire for the future, nothing worse than po just using enough wire with no slack.

 

steve2286w

Well-Known Member

• Jul 1, 2024

• #6

The bundle of connections should be covered by the the little corner cover if you have one