I'm in the process of fitting a manual inflation kit to my '97 P38a.
The car went into Hard Fault mode yesterday, it's a problem I've had a couple of times and my local indi' has diagnosed the EAS control box, the one attached to the valve block, as the problem.
I've fitted a new control box but as the car is in EAS fault mode I can't lower it to access mode to safely take the pneumatic lines off the valve block. I've read that there is a drain valve but I'm bu**ered if I can find it. An idiots guide to where it is would be great.
Any help gratefully received.
Thanks in advance
Tim
The car went into Hard Fault mode yesterday, it's a problem I've had a couple of times and my local indi' has diagnosed the EAS control box, the one attached to the valve block, as the problem.
I've fitted a new control box but as the car is in EAS fault mode I can't lower it to access mode to safely take the pneumatic lines off the valve block. I've read that there is a drain valve but I'm bu**ered if I can find it. An idiots guide to where it is would be great.
Any help gratefully received.
Thanks in advance
Tim