S

smartie1986

New Member

• Dec 16, 2014

• #1

Hi I bought the lift kit from SES88 and I was just wondering where the camber bolts go on the front end. Any photos would be appreciated as well. I have an 04 plate freelander td4.
Thanks in advance

 

Nodge68

Well-Known Member

• Dec 16, 2014

• #2

I've not fitted a lift kit so I'm just guessing here. I would think that the camber bolts replace the 2 strut to hub carrier bolts. This would allow for camber adjustment at the new lifted hight.

 

dave21478

Active Member

• Dec 16, 2014

• #3

There is only one bolt per side, so I would assume it fits in place of the upper bolt, so the lower bolt gets loosened and acts as a pivot while the camber is adjusted with the pin in the upper bolt hole, then both are tightened up.

I havent fitted mine yet - cant be harrised at the moment.

 

S

smartie1986

New Member

• Dec 16, 2014

• #4

Thanks for your help. Your like me trying to get motivated to do it. Got to many jobs need doing to the car trying to sort out the rear brakes at the min