B

burnsy76

New Member

• Mar 8, 2014

• #1

Was steam cleaning the oil from the engine to find a leak and this fell down from back of engine. Any ideas where it has come from looks like some kind of breather as it's open ended.

Would like for it to go back so if anyone could help that would be great

 

tottot

Well-Known Member

• Mar 8, 2014

• #2

Look's like a section of fuel line.

 

Tim4x4

Well-Known Member

• Mar 8, 2014

• #3

tottot said:

Look's like a section of fuel line.

Click to expand...

Yes I will go with that one, looks like a piece of fuel line which has been cut and replaced dropped at the back of the engine unable to find it and you have dislodged it whilst power washing.

Did you find the cause of your oil leak?

 

B

burnsy76

New Member

• Mar 8, 2014

• #4

Tim4x4 said:

Yes I will go with that one, looks like a piece of fuel line which has been cut and replaced dropped at the back of the engine unable to find it and you have dislodged it whilst power washing.

Did you find the cause of your oil leak?

Click to expand...

This would make sense as it would take more than power wash to dislodge it, no luck with the leak yet, going to degrease it and have a better look this week

 

B

burnsy76

New Member

• Mar 13, 2014

• #5

Found one of the leaks today, which appears to be the vacuum pump and it's spraying out when revving. Will this be the seal between the pump and block or is it more likely to be the seal within the pump??

Also if it is the internal seal, does anyone have the part number for this??

Thanks in advance

 

J

jackmac

New Member

• Mar 14, 2014

• #6

Takes 2 minutes to remove, might as well whip it off and put some decent silicon gasket sealant on it see if that fixes the problem.