SirTainly

New Member
Hi folks,

Recently bought a 1988 RR, but it didn't have a radio fitted although one was thrown into the sale. Now trying to fit the thing and finding no wires in the cavity where the radio goes. I'm assuming some twit has previously cut the wires out rather than taping them off, but given there are door speakers and roof ones, I'm wondering how to find the remains of the wires so I can replace/lengthen them to reach the radio?

Simon
 
Not sure if your dash is the same as mine (1989 Model) Where the stereo sits in the dash can be removed. Just prise the facia up slightly. The cable harness on mine runs from the right hand side of the tunnel area. BIG white plug.
 
Don't know if this will help its off ebay!

Range Rover Car Audio Amplifier By-Pass Lead
You are purchasing a unique lead which is not commercially avaliable from anyone else to enable easy fitting of any aftermarket car audio unit into all Range rovers with the pictured stereo.
The standard range systems have an external amplifier and non standard ISO connectors making it impossible to just plug an aftermarket car stereo in. The pink plug shown in the picture is a 10 way iso connector which carries all the low level signals including one for the subwoofer in the rear nearside quarter panal.
The power iso connector found in the range's aperture is wired differently to a normal one making it even more difficult to just plug your new stereo in.
We have an established car audio business and have spent a long time developing this lead which will get the best from the Range's audio system.
The standard Clarion made unit is quite troublesome and cost's and arm and a leg if it go's wrong to put right. At the end of the day it is only a rad/cass!!.


Thanks for looking and please check the other items in my shop!
Just click the link below
http://stores.ebay.co.uk/Sounds-4-Wheels_W0QQcolZ4QQdirZ1QQdptZ0QQfclZ4QQftidZ2QQtZkm
 

Attachments

  • Radio.jpg
    Radio.jpg
    8.4 KB · Views: 125
Last edited:
thanks guys, I've looked removed the trim around the bottom of the centre console, and I can see the wirign loom coming in, but no big white plug, nor any cut off wires. :(

Only thing for it is to take out one of the roof mounted speakers in the rear and see what clour wires they have and try and follow them back to see where they go.
 

Similar threads