gold rover

Well-Known Member

• Sep 10, 2017

• #1

Thread removed.

Edit: I stand corrected, thread not removed. For some reason the people/person who deals with these things has removed the first post, which was by a new member, but left the thread and my post.
You just can't get the staff these days.

 

Last edited: Sep 11, 2017

P

pete1987RRC

Well-Known Member

• Sep 10, 2017

• #2

Bet it just went round and round.

 

M

myfirstl322

Well-Known Member

• Sep 11, 2017

• #3

Let see if we can spin this thread out a bit.

 

K

kds

Well-Known Member

• Sep 11, 2017

• #4

What like wheel it out one more time ?

 

M

myfirstl322

Well-Known Member

• Sep 11, 2017

• #5

Let's start a revolution.....

 

dubbleRR

Well-Known Member

• Sep 11, 2017

• #6

Im gettin tyred all ready

 

M

myfirstl322

Well-Known Member

• Sep 11, 2017

• #7

It's just getting gripping......

 

dubbleRR

Well-Known Member

• Sep 11, 2017

• #8

Na i feel this thread is going in the wrong direction ......

 

M

myfirstl322

Well-Known Member

• Sep 11, 2017

• #9

I'll keep tracking it to make sure........

 

brianp38dse

Well-Known Member

• Sep 11, 2017

• #10

We could steer it in another direction....

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

Full Member

• Sep 11, 2017

• #11

We're just going in circles here.

 

blue beasty

Leaks an prone to bits dropping off

• Sep 11, 2017

• #12

Treading on eggshells, the threads losing traction and risks spinning off on a tangent.

Get a grip

 

wooly123

Active Member

• Sep 11, 2017

• #13

try and keep thread rolling

 

blue beasty

Leaks an prone to bits dropping off

• Sep 11, 2017

• #14

Can't keep up the pressure, it's gone a bit flat

 

SpanishTony

Active Member

• Sep 11, 2017

• #15

I'm tyred of this...

 

dubbleRR

Well-Known Member

• Sep 11, 2017

• #16

Wheel work round it.....Sorry though it was my turn""""...

 

M

myfirstl322

Well-Known Member

• Sep 11, 2017

• #17

This thread has taken a wobble, OP spoke of wheels, she's the boss, we should offset our lip service by debating the hub of the matter.......

 

dubbleRR

Well-Known Member

• Sep 11, 2017

• #18

Hold on STUD hold on.....Had a tyre made from 365 condoms...that was a"Goodyear."..

 

M

myfirstl322

Well-Known Member

• Sep 11, 2017

• #19

Just to muddy the waters, rimming is also a pottery term......

 

Last edited: Sep 11, 2017

dubbleRR

Well-Known Member

• Sep 11, 2017

• #20

Fancy a sing along ...All together....WHEEL meet again dont no where dont know when,,NO"""" OK then what about ,,,,MullO kin TYRE keep rolling in from.........I will get my coat