ratty
I'm not special I'm limited edition
can anybody tell me how to fit my disco wheels to a 1998 90 with drums all round thanks
I'd move the drums out the way so you can get to the wheels.
:doh:Once you find your way to the wheels you can use a socket and bar to undo the nuts that hold the wheels on and then remove the wheels one at a time. Don't forget to jack the vehicle up before removing the wheels as you may struggle to fit the replaceent wheels in the gap left otherwise. Providing the wheels have the same stud pattern as the landy they are going onto you can simply bolt the new ones back on.
depends on whether your disco wheels are the same stud pattern.... disco 1 is but later ones arnt. if they are alloys you need the nuts to fit the alloy wheels..... dont forget to loosen the wheelnuts before you jack the wheel off the ground..... and a final tighten after its back on the deck.
ratty
I'm not special I'm limited edition
can anybody tell me how to fit my disco wheels to a 1998 90 with drums all round thanks
where did you get the idea that your 90 has drums all round? What year disco are the wheels from? what wheels are they? what size tyres are fitted to the wheels?
