nickjaxe · Mar 5, 2018

What engine is in your new L/R...if its an old 2.25d dont go mad with large dia tyres....it alters the gearing...a 2.25d may struggle
205x16 are a similar dia to the std 600x16 SWB tyres.

I have old type series rims...took out my tube and put them in the bin years ago and fitted tubeless tyres...never had a problem...some will say not suitable.

My mate has done the same think...both had years of trouble free motoring.

I use 205x16 on my SWB by the way.

Turboman · Mar 5, 2018

nickjaxe said:
What engine is in your new L/R...if its an old 2.25d dont go mad with large dia tyres....it alters the gearing...a 2.25d may struggle
205x16 are a similar dia to the std 600x16 SWB tyres.

I have old type series rims...took out my tube and put them in the bin years ago and fitted tubeless tyres...never had a problem...some will say not suitable.

My mate has done the same think...both had years of trouble free motoring.

I use 205x16 on my SWB by the way.

Not certain, but I think later Series 3 ran 7.50x16s on both SWB and LWB.

The old 6.00x16 were a very good tyre on an 88inch, but I hesitate to recommend them now, because they are hard to come by and expensive.

nickjaxe · Mar 5, 2018

Your correct they did.

Turboman · Mar 5, 2018

nickjaxe said:
Your correct they did.

I have had em all. Series 2a and 3, SWB and LWB, but memory is an uncertain thing, and it was a while ago.

Hicap phill · Mar 5, 2018

Still Can get 600x16 but are remoulded.£70.chap in Birmingham had these & fitted to rim.
Run these on our series1 tube type
Most Landrover rims too wide for these.

Turboman · Mar 5, 2018

Hicap phill said:
Still Can get 600x16 but are remoulded.£70.chap in Birmingham had these & fitted to rim.
Run these on our series1 tube type
Most Landrover rims too wide for these.

That is interesting, and good to hear.
I have run remoulds on all my Series, and my Ninety, and never had any problems with them at all.
I would be wary of them on a high performance vehicle, always used to get new for my V8 Disco, but I can't see remoulds will be a problem with sub 60 mph vehicles.

neilly · Mar 5, 2018

For something like this I would give Beartown tyres a call, they make a lot of remoulds and are UK based, have reasonable prices.

They are at a lot of UK Landie shows as well if you can get to one.

Cheers

Hicap phill · Mar 5, 2018

Sub 60 for remoulds?

Don't worry speedo is broke

Turboman · Mar 5, 2018

Hicap phill said:
Sub 60 for remoulds?
View attachment 143888

Don't worry speedo is broke

My Ninety could hit 70 on a good day, still no probs with the tyres.

suburban · Mar 5, 2018

my s3 diesel has 7.50's on wolf rims doesn't struggle at all. well it struggles to get above 55 but it does that with any tyres

why is the 2.286 diesel referred to as 2.25, surely if rounded it should be 2.3?

Rubins4 · Mar 6, 2018

Turboman said:
I have had em all. Series 2a and 3, SWB and LWB, but memory is an uncertain thing, and it was a while ago.

My '82 swb came with 6.00 x 16, and there isn't much later you can go with series 3's ?

Turboman · Mar 6, 2018

Rubins4 said:
My '82 swb came with 6.00 x 16, and there isn't much later you can go with series 3's ?

Could be the tyres were optional, or, if you didn't have the vehicle from new, maybe they were retro fitted.

wwwfc666 · Mar 10, 2018

235/85/16 bfg a/t on defender steel wheels tubeless is what I'm looking at getting

Gun7354 · Mar 18, 2018

Thats exactly what i got from Ripon 4x4 last October, £40 each wheel with nearly new GG tyres on. Series now drives soooo much better and the steering feels lighter!!!!!

norried · Mar 20, 2018

There's 205/16 remoulds on eBay for £46 each including delivery so think I am going to go for them. We won't be using it much on road so these should be fine as they are big knobbly ones. Lol.

Norrie.

Riggwelter · Mar 20, 2018

wwwfc666 said:
235/85/16 bfg a/t on defender steel wheels tubeless is what I'm looking at getting

I had that dimension on my Series (broad wheels), but I thought my car looked like a German Shepherd puppy with too big paws...

So, when one of the tyres packed it in, I swapped them all. But, each to his own!

Georgeblade · Mar 22, 2018

wattfield said:
I always used 205R16 on my S2, I'm surprised they're hard to find now. McConechys Tyres used to stock tubes.

Actually, 205 r16 had a profile of 82 - so 205/80/r16 I so close as to be not noticeable.

Turboman · Mar 22, 2018

Georgeblade said:
Actually, 205 r16 had a profile of 82 - so 205/80/r16 I so close as to be not noticeable.

The actual measurements are very variable between makes, the sidewall sizes are nominal.
Measuring actual tyres is the best way to be sure you get what you want.

boristhes3 · Sep 23, 2020

Gun7354 said:
Thats exactly what i got from Ripon 4x4 last October, £40 each wheel with nearly new GG tyres on. Series now drives soooo much better and the steering feels lighter!!!!!

Hi there, steering feels lighter, you’re running General Grabber 205/80/16 on a 5” or 5.5” rim?

Gun7354 · Sep 23, 2020

Hi Boris i'm running 235/85/16 on new(er) defender tubeless rims.

Rich

Well-Known Member

Mab An Gov

Well-Known Member

Mab An Gov

Well-Known Member

Mab An Gov

Well-Known Member

Well-Known Member

Mab An Gov

Well-Known Member

Well-Known Member

Mab An Gov

Active Member

Well-Known Member

Active Member

Active Member

Active Member

Mab An Gov

Member

Well-Known Member

Similar threads