ScratchyDom · May 23, 2012

ratty said:
power probe.

Ooo, err, missus!:behindsofa:

lyron · May 23, 2012

cans of wd40 and a bloody big hammer, (failing that, a quick look at the insruction book to see how it should be done):behindsofa:

matthew2riches · May 23, 2012

Got to be the big hammer, I'm afraid

Other than that I'd have to say a welder and an angle grinder.

Jongould · May 23, 2012

ratty said:
power probe.

+1

Power probe is my favorite tool, saves so much time when playing with electrics...

Failing that my Makita 10.7V impact, saves so much time undoing nuts and bolts...

Pikey · May 23, 2012

Punch & chisel set Oh and a big hammer to clout em with.

That and me 18v DeWalt impact driver

Vagrent · May 23, 2012

redhand said:
Punch & chisel set Oh and a big hammer to clout em with.

That and me 18v DeWalt impact driver

Notes good as the makita 18v lion

Jongould · May 23, 2012

Vagrent said:
Notes good as the makita 18v lion

Both are too big though, thats what makes the 10.7V so good, pistol sized, if I need more I use air tools

Ianski · May 23, 2012

underseal brush

dellboy1959 · May 23, 2012

fookin big knocking stick,When i nod my head you hit it:hysterically_laughi

JUGG · May 23, 2012

shifter, big hammer and wd40

Grit Valve · May 23, 2012

Prop shaft tool save so much time with those f in fine thread buggers ,sump drain plug with hose for defenders . And best of all atf fluid transfer pump you try filling up a r380 gear box without spilling it all over yourself oops that's three O and defender wheel bearing box spanner!

Sean · May 23, 2012

Vagrent said:
Aye, my stihl ts400 is fooking great.

snap

lr-90 · May 23, 2012

blue beasty said:
Are we talking tools fer Landys?

Just checking........

Yes

goonarmy · May 23, 2012

sledge.

Jongould · May 23, 2012

goonarmy said:
sledge.

Surely thats only good when it snows?

gazdav · May 23, 2012

Heli-coil kit when that bolt snaps and you have to drill it out accept no substitute.

wangie46 · May 23, 2012

Gotta go with the majority here and say big f**king hammer always works a treat

crashbox · May 23, 2012

If I had a bush compressing tool for the front spring chassis bush, that would be my best tool right now but at £200 I dont have one.

Hamsterberg · May 23, 2012

Welder
Jack...........hammer

chunkymunky · May 23, 2012

T'internet.

Well-Known Member

Active Member

New Member

New Member

Dummy Ejection Facilitator..

Yaaaar

New Member

New Member

Well-Known Member

Member

2000 4.6 Vouge

Banned

New Member

Beer tester

New Member

New Member

Active Member

Well-Known Member

Well-Known Member

New Member

Similar threads