mark666freelander

New Member

• Oct 16, 2012

• #1

Burner heater sensor ?

 

Attachments

• 
  image.jpg

  527.7 KB · Views: 409

mark666freelander

New Member

• Oct 16, 2012

• #2

anyone ?

 

Phil E

Member

• Oct 16, 2012

• #3

Yes it is. The reason I know? I have a brand new one in front of me purchased today!

 

mark666freelander

New Member

• Oct 16, 2012

• #4

Thanks for the mate well it seems my one is fine had the fbh fire up on me to night i thought the car was going to blow up

 

Phil E

Member

• Oct 16, 2012

• #5

Must be cold then up in Aberdeen!!


Incidentally, how easy is it to get to get the bumper off to get to the sensor?
Hoping to replace mine tomorrow or whenever my daughter allows me to have my car back!!

 

mark666freelander

New Member

• Oct 16, 2012

• #6

Yea its getting cold up here now living right next the the north sea dont help either am not sure mate my fl has had a knock at some point in it life so theres no grill in that part of the bumper

 

D

Dann

Active Member

• Oct 17, 2012

• #7

Phil E said:

Must be cold then up in Aberdeen!!


Incidentally, how easy is it to get to get the bumper off to get to the sensor?
Hoping to replace mine tomorrow or whenever my daughter allows me to have my car back!!

Click to expand...

The self tappers are poor quality and corrode, I had to use 'Mole' grips to get them out, they were replaced with galvanised self tapping screws. The bolts behind the headlamps were also rusted solid and were cut out with a small angle grinder. They were replaced with stainless and now front bumper removal takes 5 mins. If the grille was removable this job would be simple. Cheers.

 

Phil E

Member

• Oct 17, 2012

• #8

Dann said:

The self tappers are poor quality and corrode, I had to use 'Mole' grips to get them out, they were replaced with galvanised self tapping screws. The bolts behind the headlamps were also rusted solid and were cut out with a small angle grinder. They were replaced with stainless and now front bumper removal takes 5 mins. If the grille was removable this job would be simple. Cheers.

Click to expand...

Joy!! I shall look forward to this then

With thanks Dann