Steviecops

Active Member

Full Member

• May 3, 2017

• #1

Can anyone tell me what this plug has become detached from? Found it just hanging today and can't see where it should go?

 

discool

Well-Known Member

• May 3, 2017

• #2

Looks like the black connector is still attached to part of an oil pressure switch.

 

P

pete1987RRC

Well-Known Member

• May 3, 2017

• #3

IDE go oil pressure switch too, connect it to earth and see if the light comes on.

 

Steviecops

Active Member

Full Member

• May 3, 2017

• #4

Ok, thanks, will do. If it's oil pressure switch, where is it located so I can connect it up again?

 

neilly

Well-Known Member

• May 3, 2017

• #5

On the oil filter housing, just above and to the front of the filter.

Cheers

 

neilly

Well-Known Member

• May 3, 2017

• #6

If it is not connected the idiot light onthe dash should not be lighting up when ignition is on.

Cheers

 

Steviecops

Active Member

Full Member

• May 3, 2017

• #7

Ok, thanks for that. I'll check it out tomorrow.

 

mr glee

Active Member

• May 4, 2017

• #8

Looking at your photo the white bit is part of the switch which has brokern off done mine in changing the oil cooler lines as i remember there was a spring in there .so you're going to need a new one only about £5 and a quick easy job.

 

sierrafery

Well-Known Member

• May 4, 2017

• #9

You can't plug that back cos it's snapped, as discool + mr glee have said it's part of the switch... you need a new one to connect that plug to

 

Last edited: May 4, 2017

Steviecops

Active Member

Full Member

• May 4, 2017

• #10

Ok, thanks for the info.

 

Steviecops

Active Member

Full Member

• May 4, 2017

• #11

New switch in order.