ratty · Mar 5, 2008

Ever since I have had my 300tdi defender I have had a sloppy gear change. The other day I decided it's about time I sorted it out. I lifted the rubber gearstick gaiter expecting to see a broken spring or Bias plate.

How wrong can you be?

My gearstick Is held in place by a single screw and washer on top of the ball of the gearstick.

Does anybody know what I am missing so I can rectify it ASAP? It looks like some kind of plate with 3 holes should go there. I purchased part no.FRC7686 Which is a defender gear selector housing from fleabay but it isn't the part I need. Does anyone have an exploded diagram or piccy that may give me a clue.
cheers.

Madcowz · Mar 5, 2008

I don't know if this is the right diagram...

/Mad

ratty · Mar 5, 2008

cheers madcowz.
It looks like the right diagram. I take it The ball selector is only held in by 3 screws with washers then. Mine has only one at the moment. I will try another 2 and see if that works.

mungajeep · Mar 5, 2008

Ratty , i think you should take it to a good garage that could fix it for you !!!!
Do you know any ?????

ratty · Mar 5, 2008

mungajeep said:
Ratty , i think you should take it to a good garage that could fix it for you !!!!
Do you know any ?????

Nah they are full of dodgy geezers in this area.

robint · Mar 5, 2008

hey ratty you haveing problems !!!

G-man · Mar 5, 2008

he's got a floppy stick

ratty · Mar 5, 2008

robint said:
hey ratty you haveing problems !!!

Hi Robin

Yes and no. I have several little niggles with my landy and thought I'd better sort em out. I got a bit worried when I found that there was bugger all holding my gearstick in place. Am happier now I know it's just a couple of screws loose.........well missing

robint · Mar 5, 2008

hey!!! tis a long way to get towed home where were going on sunday !!!!!!!!!

ratty · Mar 5, 2008

Don't worry it aint dropped off yet and I am sure I can find a couple of screws by then.

Pikey · Mar 5, 2008

M8 x 25mm

ratty · Mar 5, 2008

redhand said:
M8 x 25mm

Cheers redhand. I got a few m8 bolts hangin about so i'll bung em in. Am I right in saying the disco gearboxes have got an extra rubber flange on the top?

Pikey · Mar 5, 2008

Aye the whole mechanism is different.

ratty · Mar 5, 2008

you aint jokeing. Hopefully two new bolts will give me decent gearchanges at last. Cheers red

ratty

I'm not special I'm limited edition

Madcowz

New Member

ratty

I'm not special I'm limited edition

mungajeep

Member

ratty

I'm not special I'm limited edition

robint

Well-Known Member

G-man

BBQ king

ratty

I'm not special I'm limited edition

robint

Well-Known Member

ratty

I'm not special I'm limited edition

Pikey

Dummy Ejection Facilitator..

ratty

I'm not special I'm limited edition

Pikey

Dummy Ejection Facilitator..

Attachments

ratty

I'm not special I'm limited edition

Similar threads