Oh, yeah, forgot the Procomp Shocks.

Bank balance has taken a bit of a hammering recently.

New oils and filters everywhere
Removed steering damper
Removed floor and jet washed gearbox and transfer case housings as it was minging
Repaired door tops and sprayed black
Fixed hand brake indication light
Cleaned out fuel tank
New injector tips
New (old style) glow plugs
Removed engine and renewed clutch (big dramas)
Scrubbed all the green moss **** off the roof

Got scared ****less when I realised there was a snake hiding in the engine bay, this morning.

Hopefully get a run up the beach on Sunday coming.......:clap2::clap2:

Stripped down to bare chassis
Fitted new rear crossmember,outriggers and many patches welded on
Repainted chassis in black
Fitted engine and box back in
Repaired and fitted replacement bulkhead
Fitted another rear tub
Welded a full rollcage on
Fitted rocksliders
Fabricated new front shocker mounts to fit disco +2" shocks
Made a new exhaust system
Rewired most of electrics
Replaced seats
and lots lots more

on mine today, nothing except drive it again

on one club members i finished off refitting the front end after having changed the dumb irons, all bolted up nice and tight and all lights working again correctly he's just got to collect it now

on another mates i've finally wrestled the bulkhead off and slapped another lick of paint on the pedal boxes, grinding, welding and painting to come once i've found a bulkhead centre panel (this one has been cut out in the past and is missing) and bought a pair of footwells