Discovery 2 vehicle purchase check points.
( Not to be considered a definitive list ).
Chassis:
1)Rear Chassis - rear third of chassis is prone to rusting.
2)Check entire chassis for rust.
Instrument warning lights:
1)3 Amigos , HDC/ABS/TC warning lights are not on when engine is running.
2)Instrument warning lights work as they should , self check lights extinguish as they should. Example ABS / HDC / TC / SRS/ACE ( if fitted). read full explanation in owners handbook. ( see extract below)
Engine compartment:
1)All fluids are to the correct levels. Engine oil / PAS / Coolant / ACE if fitted.
2)Power steering pipes run under the radiator and prone to rust.
3)Check if wastegate actuator rod has "standard" number of threads showing which is approx 13.
Car interior:
1) Sunroofs leak. Check roof liing for dampness.
2)Check passenger and drivers footwell for dampness.
3)Check rear boot carpet for dampness.
4)Verify all doors lock and unlock using the fobs / key in door lock and the centre console lock button.
5)Check all electrics work as they should. Windows , mirrors, Sunroofs, seats.
6)Check all windows raise and lower smoothly.
7)Check all doors open on the outside door handles. Once unlocked.
Transmission / Gearbox:
1) Check and select if fitted the Central Diff lock. ( not fitted to all D2's )
2Check Low box and High engage and disengage as they should.
3)Check all Forward and reverse gears engage and disengage as they should.
Car Security:
1)Check if two fobs are present and working.
2)Check all keys work in drivers door lock and the ignition.
3)Check paperwork has the EKA code
SLS - Air Suspension:
1)Check if car should run on air suspension if it is still fitted.
2) If fitted with air suspension , press ORM button and raise vehicle to off road raised height. Press again to lower.
ACE - Active cornering enhancement:
1) Look underneath for leaks from the ACE system if fitted. Front and Rear suspension.
2)If ACE has been removed question if pump / has been removed and ARB's are now standard.
Diagnostic checks:
1)If possible put diagnostics ( nanocom / hawkeye ) on car and verify if any faults are recorded. Remove if possible before test drive. Review after test drive.
2)If Diagnstics available check MAF has a reading of approx 55 showing when engine idling.
