crbeasley01

New Member
Found this for sale near me, listed as a 1994 110. Has the original 4 cylinder petrol engine apparently. Never seen one without a roof like this. Any information about this type of Defender? Not sure if I should look into buying it and its a legit thing that rolled out of the factory or a hacked apart Defender.
 

Attachments

  • IMG_9194.PNG
    IMG_9194.PNG
    354.4 KB · Views: 280
  • IMG_9195.PNG
    IMG_9195.PNG
    559.1 KB · Views: 263
Welcome to the group.
Are you looking to buy a Defender ?
Do you own one already ?

I presume your photo's (which are a bit small to see any detail TBH) are from a foreign land ?
 
Welcome to the group.
Are you looking to buy a Defender ?
Do you own one already ?

I presume your photo's (which are a bit small to see any detail TBH) are from a foreign land ?


Hi there,

Thank's for your reply. I am currently looking to buy a Defender. This one just came up for sale near me in Abu Dhabi where I am currently stationed at. Planning to buy one while I am here and then bring it back home with me.Thought this one was an interesting spec as I have seen pickups, wagons, and the 2 door van styles ones but never one with no roof at all. Wasn't sure if it has been modified or if this was a Defender actually offered.
 
Welcome aboard :)

Found this for sale near me, listed as a 1994 110. Has the original 4 cylinder petrol engine apparently. Never seen one without a roof like this. Any information about this type of Defender? Not sure if I should look into buying it and its a legit thing that rolled out of the factory or a hacked apart Defender.

The 110 was available in all sorts of specs ... with roof, without roof - even without rear tub for coach builders etc.

It would be "normal" for this 110 to have a canvas "roof", on hoops, and the associated body fittings to support same .... are they present ?

As per post #2, those pictures are too low a resolution to be much use - BUT, that said, the second pic seems to show a vehicle which has had a heavy passenger side impact - the bumper centre line, axle centre line and the bonnet/wings are not lined up correctly - could be an artifact ( of the pic ) .... BUT I'd advise caution.

It also looks like it has been polished to within an inch of its life - which is sometimes used by car dealers to hide defects .... :rolleyes:

We'd need to see much better pictures, and include some of the chassis too ...

Have a nosy on the tube for a channel called Britanic restorations - he has some excellent videos on what to look for in terms of buying one .... :)
 
Defenders unbolt. That is an early 110 or possibly a 127 'series' landrover, likely a military version as it had a soft top (tilt) and still sports the military tow hook.
Just unbolt/remove the roof and thats what they look like.

The later Defenders, with the diesel engines' had different front doors where the handles stick out and the tops don't come off.
The 'air intake' is a modification and it's been resprayed.
 
Body is modular, so you can lift the roof off of any of them. Other than that, just looks like a regular 110.
 
The military 110 soft tops had a roll bar behind the front seats. The seat belts attach to this at the top mount.
I wouldn't want to be driving a soft top Land Rover without some sort of roll over protection.
 
Found this for sale near me, listed as a 1994 110. Has the original 4 cylinder petrol engine apparently. Never seen one without a roof like this. Any information about this type of Defender? Not sure if I should look into buying it and its a legit thing that rolled out of the factory or a hacked apart Defender.

@crbeasley01 , looking at this Defender I'd be walking away from this unless very cheap. Nothing on the front end is straight/level which strongly hints at a bent chassis and/or a beyond crap re-assembly. Add to this the bonnet, no roll over protection and shiny paintjob the alarm bells are ringing. There are plenty of properly straight Defenders out there to choose from.

eta - many an MOD Land Rover has led a hard working like, the majority were as hammered tools and often have skewed front ends from frequent heavy front end impacts. Look very closely for inner chassis creases just before the gearbox crossmember and no front end trapezoid chassis shape from bulkhead/outrigger area to front cross member. Same with lateral & diagonal measurements, they should be perfectly 'true' in all planes.
 
Last edited:

Similar threads