tis only dangerous if the heater is switched on and the tank has fool in it. and this tank dunt smell like it ever has had any in it?
 
fitted a A bar,( reasonably easy.)
fitted rear bumperettes.(again pretty easy )
swapped my rusty nuts and bolts for lovely shiny stainless ones(major pain in the arse.more cuts on the back of my hands than i can count)
 
Naff all, cos the more I tinker with and look for "faults" the less money I've got to get me noo two wheeled death trap:doh:, doing my head in not looking though as I can hear her "calling":lalala::lalala::lalala:
 
goonarmy said:
To do the weekend:Oil change-finally Done **** of **** with the right tool, replace bulbs with ultra bright ones nope, check brake pads see why they are squealing so much sort of , maybe find some new greenlanes at me folks no such luck..
Click to expand...
Also did HT leads and loose starter motor wire, starts much brisker now.Coolant and oil level checks for tonight.
 
finally fixed me tailgate lock so it err locks :rolleyes: put a new lpg vapouriser on in place of me leaky one and found the coolant leak that was hiding underneath it! fitted me new cb, got no idea if it works yet tho:) got horn to work after a swift whack and cleaned me windows inside to get rid of the marks where i keeps lickin em:D
 
rustyrangie said:
finally fixed me tailgate lock so it err locks :rolleyes: put a new lpg vapouriser on in place of me leaky one and found the coolant leak that was hiding underneath it! fitted me new cb, got no idea if it works yet tho:) got horn to work after a swift whack and cleaned me windows inside to get rid of the marks where i keeps lickin em:D
Click to expand...

reckon the faries will entrap you on the ridgeway for cleaning the cobwebs out.......:flame::D
 
Well boys/girls welded the last hole (I hope) in the passenger side of the chassis, and painted it few bits to do on that side again. Thursday I'll have a look at the other side see what state that is in, I will get there one day.:rolleyes:

Andy.:beer2: :beer2:
 
:D :D i was rel careful to leave all me cobwebs in place ;) could do with an mot place down this way like ethans;) it's save me weeks worth of weldin :rolleyes:
 
on sunday took it to weston and drove through the surf in the dark.. made a pretty big splash

today ordered service kit and engine oil.. gonna do diff oils etc after salisbury...
 
fitted passenger side rear shock drop plate but ran out of time to do drivers side because i had to cut the nice shiney galvanised plate to fit in the space i had:mad:

gonna do other side in the morning so its not pis#ed up:rolleyes:

then the lift is compleate an i just need the new tyres to go on coz it looks daft coz the wheel arches aren't filled:rolleyes:
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
375
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
411
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
681
Knappster
Knappster
I
Re-coding of ABS Module after repacement
Replies
10
Views
729
invisible999
I
C
Freelander 1 crank no start
Replies
1
Views
1K
niccage
N