Kev@kenninghall
Well-Known Member
What you doing with the seat? I'm after one so that my daughter can be dragged, kicking and screaming, into the joys of greenlaning and pay and play
What you doing with the seat? I'm after one so that my daughter can be dragged, kicking and screaming, into the joys of greenlaning and pay and play
Kev@kenninghall
Well-Known Member
Today I 'changed' the oil in the transfer box only to watch it fall out again from the leaks.
Today i removed the front prop. I had a great trip home last night at 45mph with some lovely grinding and grumbling noises coming from under the landy.
Managed to get under it today and yup UJs knackered at transfer box end.
Still now I know that the centre diff lock works (dash light doesn't mind) as I now have a 2wd Landy.
Tomorrow I'll have a look at what bits I need to get to change the UJs
Managed to get under it today and yup UJs knackered at transfer box end.
Still now I know that the centre diff lock works (dash light doesn't mind) as I now have a 2wd Landy.
Tomorrow I'll have a look at what bits I need to get to change the UJs
wickford90
Well-Known Member
Replaced all the bushes with genuine parts, bugger cutting and drifting out the old ones. piece of **** pressing the new ones in with the bearing press i made up in the week.
wickford90
Well-Known Member
went to my local engineering firm gave him the sizes of what i wanted, he cut all the bits to size, £25. Could have got the steel cheaper but it was worth it to get it all cut especially the corner braces
mikescuba
Well-Known Member
Replaced all the bushes with genuine parts, bugger cutting and drifting out the old ones. piece of **** pressing the new ones in with the bearing press i made up in the week.
Good job.
jedmundson
New Member
I washed and polished my td5 today. Doh!! Now I can see all the scratches, and wished I had left the "I'm a dirty old farmer" look. 😖
discomark10
Well-Known Member
Replaced all the bushes with genuine parts, bugger cutting and drifting out the old ones. piece of **** pressing the new ones in with the bearing press i made up in the week.
Great job. I've been thinking about making one recently butthe cost of buying a big jack to stick in put me off.
What tonn jack is it?
wickford90
Well-Known Member
It's an 8 tonne one I keep in the fender, don't think they are expensive to buy, would need a much bigger one to press bushes out, mine would not move with the jack.
timberjock
Active Member
its now done 100,000 klm in my ownership n still going fine with an odd hiccup along the way
discomark10
Well-Known Member
done the template for my bumper bracket and started removing unneeded bracketry on the d2 axles.
jai_landrover
Well-Known Member
Sad with the mirror backs:
