robint
Well-Known Member
and wheres all me racket spanners gone i cant find them knew it wasnt a good idea to open garage door up
RealSillyTilly
New Member
Took the bearing out of the squealing AC on the 300tdi, I just have to find n buy a replacement one now. Fixed the knackered and horrible sagging drivers seat with nylon cord and a few giant tie wraps.
The nylon clip nut thing on one of the rear window mechanism fell apart and i couldn't find one anywhere, so after some google'ing and a bit of youtube inspiration ended up with this 10p fix / bodge.
I think you'll find that's treason!!!
Pikey
Dummy Ejection Facilitator..
I has one on me keyring
Did it whilst testing me noo metal Hole punch. Very good it was too... 
discomark10
Well-Known Member
Very tidy!
Welding.
Bit more welding, then for a change a bit more welding. I need a new mask, I have sunburn! ordered a cheapie from ebay, £20 ish .. should be Ok for the small amount and in frequency of welding that I do .. ebay No 180988430486
Going for a canal trip shortly, then will seal it all and prime it later. All inside the rear so might not give it a full paint job, but will underseal the outside. Looks like me arches will need doing next year!
Bit more welding, then for a change a bit more welding. I need a new mask, I have sunburn! ordered a cheapie from ebay, £20 ish .. should be Ok for the small amount and in frequency of welding that I do .. ebay No 180988430486
Going for a canal trip shortly, then will seal it all and prime it later. All inside the rear so might not give it a full paint job, but will underseal the outside. Looks like me arches will need doing next year!
removed o/s inner sill up to front body mount. ready to derust underneath prior to repaint and replacement.
West Slope Rover
Well-Known Member
I've been out trying to put together a list of the things wrong with the newly acquired 1989 RRC. So far, it's a fairly long list.
a2dds
Active Member
Fitted new polybushes on a frame. Pig of a job, one bolt came out easy, the other had rusted to the metal sleeve in the bush. Spam endlessly. Tried everything to get it off. In the end I took and angle grinder to the bolt, ate away bit by bit. Took for ever. Horrid job, loads of **** on me. Including rubber from heating the bolt up and it spitting at me :/.
Having real trouble sourcing some break pads for front. Tis a 1989 90 with solid disks. All I can find is 1990 onwards :/ anyone know a part number?
Having real trouble sourcing some break pads for front. Tis a 1989 90 with solid disks. All I can find is 1990 onwards :/ anyone know a part number?
RealSillyTilly
New Member
Arrrrrrrrrrrr thanks
discomark10
Well-Known Member
I would have thought it would be the same
the_wolf
Well-Known Member
I've never had a problem finding brake pads for mine and mine is a 1987 90. I imagine they would have exactly the same axles. Should be same as discos too. Find a good motor factor and they'll sell you the right ones
discomark10
Well-Known Member
Smashed.. the lost! the front indicator
a2dds
Active Member
Ones I got were too wide but had the right pin fittings. Bit confused
discomark10
Well-Known Member
Ill sell you my used and now thinner ones hehe
Sounds like they were for the vente disc's
heheSounds like they were for the vente disc's
jamesmartin
Well-Known Member
stc9186 for split pin securing or sfp500160 for solid pin
