Fitted 3 seats in the back of the 90 with 3 point seat belts so I can take the little ones green laning a bit more safely and removed half the centre bulkhead. Off to Birmingham on tuesday to pick up roof rack and that will sort out where the spare wheel is going to live !!!!!....
 
Decided that mine is out too send me to the looney bin!!!Stop one oil leak only to find another,stop that one only to see first leak back again!!!:eek:
 
Found out I need a wiper motor and central locking solenoid for the boot and then i need a door latch as well.

To top it all off I think the starter motor is slowly failing on it :(

Still she is an old girl and she still goes :) not bad with a 1996 disco
 
Replaced the swivel grease, had a check over the underside, checked fluids and topped them up etc, swapped the sidelights for brighter LED jobbies and replaced a defunct rear fog light with a shiny new one that now works :)

Once I'd finished that I reversed over my tool box with the landy and destroyed it.....completely. I thought I'd moved it, obviously not far enough lol :(
 
I had the bent front axle replaced with a Salisbury axle. Also replaced the front shocks whilst it was stripped down. Feels much smoother. Now to sort out the foot wells. I was going to try and do it myself till I burned a hole through my test piece of metal. Think it might be best to take it round to a garage.
 
Got her a replacement engine! As the power has definitely gone due to worn piston/bore. Already had a factory rebuilt gearbox, and new clutch a couple of weeks ago, got new headlights and sidelights to buy, and door rubbers to stop the icy wind coming in!
 
Welde a piece on to my exhaust box so as it fits the downpipe which ends alongside the clutch housing.
Idea is to route the tailpipe from the exhaust box (next to gearbox/transfer box) and take it out on the offside somewhere, maybe just in front of the rear wheel coming through the bodywork......................thats the plan anyway:)
 

Similar threads