Replaced me brake light holder on the 110 as the bulb kept popping out. Put on new Wipac one.....bag of **** the holder wasn't seating correctly so got another out of stock and put that on. Works fine now.Even replaced the other lens so they match....
 
Bromsgrove Defender said:
oooo what else ya got?

series II seat box tool box trayee thingy? No

wing mirrors? No

Dash lighty's? Only series 1 ones

light switchy thing? If you mean the black un the key goes in then no

wheels? I have a set of wheels. Not series though but silver mods with at's on:D:D:D
Click to expand...

;)
 
Sirus said:
Originally Posted by Bromsgrove Defender
oooo what else ya got?

series II seat box tool box trayee thingy? No Bugger!

wing mirrors? No Double Bugger!

Dash lighty's? Only series 1 ones Triple Bugger!

light switchy thing? If you mean the black un the key goes in then no No the one that is just the grey un running light thingy

wheels? I have a set of wheels. Not series though but silver mods with at's on:D:D:D Noooooooo :doh:
;)
Click to expand...

:cool: :D :D
 
Replaced the PRND321 backlight bulbs with 3W jobbies as the 5W ones were getting ridiculously hot to the point of plastic meltage!
 
Wahey .. FINALLY found the rattle when setting off and occasionally when slowing down. Been progressively getting worse for the last couple of months. Sounded originally like it was a pulley, then exhaust at the front, then exhaust at the back, then no idea 'cos it didn't seem to come from the same place every time .. really feckin' baffling.

So this evening I got the Disco on ramps on only one side so it's leaning over, ran the engine and listened .. definitely exhaust ... engine off .. mounting bracket for centre bit is bolt-on and I'd missed it, I always thought the mounts were welded on! So a quick tighten up with a 13mm spanner and Roberts shagging the auntie again .. ;)

I is happy now, and the wife happier 'cos she thought the world was gonna end (again) and cost a fortune! ;)

I also cut up a DVD cover and temporarily fitted (Electrical tape) them to the light-bar lights to see if they work at stopping the light getting into the cabin.
 
Paul D said:
Wahey .. FINALLY found the rattle when setting off and occasionally when slowing down. Been progressively getting worse for the last couple of months. Sounded originally like it was a pulley, then exhaust at the front, then exhaust at the back, then no idea 'cos it didn't seem to come from the same place every time .. really feckin' baffling.

So this evening I got the Disco on ramps on only one side so it's leaning over, ran the engine and listened .. definitely exhaust ... engine off .. mounting bracket for centre bit is bolt-on and I'd missed it, I always thought the mounts were welded on! So a quick tighten up with a 13mm spanner and Roberts shagging the auntie again .. ;)

I is happy now, and the wife happier 'cos she thought the world was gonna end (again) and cost a fortune! ;)


I also cut up a DVD cover and temporarily fitted (Electrical tape) them to the light-bar lights to see if they work at stopping the light getting into the cabin.
Click to expand...

ready for mud then :p
 
Always .. ;)

Well, so long as the AT's (or someone's winch) get me through .. :)
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
549
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
647
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
927
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
593
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
1K
invisible999
I