Changed the PTO bearing in the T-box ... with help from Mr Bromsgrove Defender ... no more overrun noise and no more lumpiness and clunking :)
 
I pressure washed my landy today then swiftly cracked one off on the bunnet.
Best day off i have had in ages.

Tomorrow I think I will sit on the gear stick and possibly a quick trip to the local dogging spot.
 
Put the new clutch kit and release arm and second hand pivot point in and threw the gearbox back on. Piccies of pivot points, notice wear on bearing slide tube inorl. And wear on slipper pad and pin on the old release fork.

P7160091.jpg

P7160092.jpg
 
Rookiescot said:
I pressure washed my landy today then swiftly cracked one off on the bunnet.
Best day off i have had in ages.

Tomorrow I think I will sit on the gear stick and possibly a quick trip to the local dogging spot.
Click to expand...

I had to read that 3 times as i thought what i was reading must be wrong!
 
Took the lights off the lightbar and put 'em on the bumper .. doesn't look as 'cool' but they work well enough and won't shine into the cab there. Ordered some square lights for the roof, see if they work!
 
I've had to leave the old girl on the farm today :(

Clutch had been bad the last few days and then when i went to go home today it wouldnt go into gear. had abit of a poke about, checked fluid, tried bleeding it, nowt :mad: Looks like the master cylinder is gone
 
Bought replacement headlamp bulb, haven't put it in yet. Rang the parts place had two options...a peasant bulb for a fiver or a gold-plated latinum hydrogen powered halogen fired thingy for £95 quid! Are you serious?!? :eek:
 
Put a volt meter to the rear wiper as that has stopped working. :(

Volts = OK

Oh bugger another strip down to see what is up.

Spare wheel off, wiper arm off all that stuff.

.. this is holiday full day number 11 too
 
Ok so not today but just uploaded picture's of the build.
From this
Thebuild002.jpg


Insulated
Thebuild020.jpg


Head lining removed
Thebuild012.jpg


To relined
Thebuild150.jpg


And finished
Thebuild149.jpg


Many hours spent on it just got to try it out :D
 
DJ Xan said:
Ok so not today but just uploaded picture's of the build.
From this
Thebuild002.jpg


Insulated
Thebuild020.jpg


Head lining removed
Thebuild012.jpg


To relined
Thebuild150.jpg


And finished
Thebuild149.jpg


Many hours spent on it just got to try it out :D
Click to expand...

Nice work is the plan to make the back into fold away beds ?

i know in the army we used to use some stretchers with the handles cut off in the back and suspended them from the internal roll cage with chain for when we was away
 
Fevs77 said:
Nice work is the plan to make the back into fold away beds ?

i know in the army we used to use some stretchers with the handles cut off in the back and suspended them from the internal roll cage with chain for when we was away
Click to expand...

All measured up for two folding matresses. Still got to make two drawers for it and some other bits but need to sort the starter motor first so its back out there with the spanners
 
I was on the phone for a couple of hours standing next to my landy and have cleaned off all the mud from the laning trip, from the whole of the drivers door , with my finger ,during the call :D
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
469
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
565
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
826
Knappster
Knappster
I
Re-coding of ABS Module after repacement
Replies
10
Views
907
invisible999
I
C
Freelander 1 crank no start
Replies
1
Views
1K
niccage
N