blue beasty
Leaks an prone to bits dropping off
that new brown paint job looks good mate roller or sprayed
Sprayed......but changed me mind later and changed it to white
Sprayed......but changed me mind later and changed it to white
ratty
I'm not special I'm limited edition
Myself and the ballast went for a testdrive to see if the new injector seals have solved the cutting out problem. I started with a drive into wells and picked up some coal. After loading up the landy up I then headed out of Wells, past Wookey Hole and Ebbor Gorge and up towards priddy where I stopped for a cup of tea while overlooking the Somerset levels at Deer Leap.
So it is okay now? Or are you awaiting recovery now
Sirus
Your all Banned except me
ratty
I'm not special I'm limited edition
It seems to be all ok. It took a couple of seconds of cranking over to start it but bearing in mind it hasn't been driven since the fuel pump and seals were changed I'm not too surprised.
I rekon I may need to give the wastegate another jiggle cos I did have a bit of lag at one point and it did overboost a couple of times but apart from that it seems ok.
ratty
I'm not special I'm limited edition
Did you push her or did she jump herself?
Neither. she wouldn't get close enough to the edge.
Dave90
Well-Known Member
Put all the bits that I took off yesterday back on Including, Rear seats, subwoofer, 6x9's, chequer plate sills and rear quaters, front grille and surround, driving lights and re-wired Also checked all the levels under the bonnet, topped up with a pint of engine oil, secured the oil breather pipe from block to rocker cover properly with hose clips, stuffed a litre of spare engine oil in a container behind the brake servo to be safe and filled up my spare washer fluid reserve bottle Oh yeah and played with the setting on my amp, so now the bass is coming from the amp-sub and not from tuning the headunit, if I do that the normal speakers don't like that much stick, Got a good amount done today and couldn't have asked for better weather to do it in
Including, Rear seats, subwoofer, 6x9's, chequer plate sills and rear quaters, front grille and surround, driving lights and re-wired Also checked all the levels under the bonnet, topped up with a pint of engine oil, secured the oil breather pipe from block to rocker cover properly with hose clips, stuffed a litre of spare engine oil in a container behind the brake servo to be safe and filled up my spare washer fluid reserve bottle Oh yeah and played with the setting on my amp, so now the bass is coming from the amp-sub and not from tuning the headunit, if I do that the normal speakers don't like that much stick, Got a good amount done today and couldn't have asked for better weather to do it in 
Drookit Dug
Active Member
I took my Defender shooting cos' it's Sunday, then took it to the pub for lunch. Then took my Disco to the jet wash as it's due an MOT this week.
buckshot
Well-Known Member
started to fit my cb got good clean earth new ariel and mount new cb and cant get the swr to drop at all
sounds like you got a strand of outer braid touching the center core , or the mike lead/plug could be suspect .
discomikey
New Member
picked it up from the modified vehicles shed at the show. didnt win but i wasnt expecting to as there was some reallllly nice landys there. had a good nosy around mr noisys disco. i want it
Ninja Haggis
New Member
Today, we did do the challenging task of .....
Fitting new tax disc holder wot I had made speshul :
NH Tax Disc Holder (1275 x 844)
Fitting new tax disc holder wot I had made speshul :
NH Tax Disc Holder (1275 x 844)
big si
Well-Known Member
I bet that was a taxing jobToday, we did do the challenging task of .....
Fitting new tax disc holder wot I had made speshul :
NH Tax Disc Holder (1275 x 844)
blue beasty
Leaks an prone to bits dropping off
Ninja Haggis
New Member
the princely sum of £ 3.25 delivered.
I fort that wasn't too bad
I fort that wasn't too bad
