Changed my spot lights, took off the square crappy ones, and replaced with nice stainless, round driving lamps, luverly :D
 
Fitted a new gearbox selector switch got all gears now and silicone sealer round windscreen so hopefully it won't let in water .
 
Used it to pull out some old bushes around the car port, the old bushes have been replaced with some nice box profile sheets to protect my Land Rover, my mums C1 and my brothers mini from the elements, oh and we also took the box for a walk in it :biggrin1:
 
Mark L said:
Have you replaced the thermostat?
Click to expand...


stat now done...

rubber seal gone! i mean totally gone! the whole thing was full of powdery crud. which must have got loose and into heater matrix and blocked it.

the feed pipe to the matrix was swelling when engine revved.. the return was stayin cold...

its now perfect, heater loverly and warm again..

cheers for the help nunny..

also did nunny's wheel bearing on the big green monster..
 
nick2303 said:
stat now done...

rubber seal gone! i mean totally gone! the whole thing was full of powdery crud. which must have got loose and into heater matrix and blocked it.

the feed pipe to the matrix was swelling when engine revved.. the return was stayin cold...

its now perfect, heater loverly and warm again..
Click to expand...

Excellent. Top job. ;)
 
Changed the belt tensioner today. Luverly & quiet again now! :D

Also finally got round to putting the refurbished headlining back in.
**** bag of a job but more than worth it in the end - very pleased with the end result. :5bhurray:

HeadL.jpg
 
found another hole , welded it up now have a hole free disco then waxoiled me chassis 2 more jobs to do then off for an early mot next week
 
Dressed up the welds on my chassis repairs and trying to figure out a way to line up both rearmost spring hangers. Please see my thread.
 
spent the afternoon with a grinder buffer wire wheel and sandpaper looking for the friggin chassis number wich doesnt seem to be on the front drivers chassis leg anywhere gonna investigate the other leg tomorrow :confused::confused::confused:
 
johnny curt 1 said:
spent the afternoon with a grinder buffer wire wheel and sandpaper looking for the friggin chassis number wich doesnt seem to be on the front drivers chassis leg anywhere gonna investigate the other leg tomorrow :confused::confused::confused:
Click to expand...
Front passenger side Johnny, about 9 inches from front.
 
jamesmartin said:
its allways on that leg ,havent you got vin plate anywhere
Click to expand...

i found the engine block number and gearbox serial number but not found anything for the chassis yet but it is laced with comedy patches here and there

check out the ( shes home boys thread ) ive just put pics up of where ive been cleaning and digging lol
 
johnny curt 1 said:
spent the afternoon with a grinder buffer wire wheel and sandpaper looking for the friggin chassis number wich doesnt seem to be on the front drivers chassis leg anywhere gonna investigate the other leg tomorrow :confused::confused::confused:
Click to expand...

Might not be there mate.
Ive had landys in the past that have been welded in that area and chassis number gone:mad:
 
took the Rangie down to the dealer to look at the cause of the book symbol. Paul the tech laughed and said there were over 30 fault codes. He just cleared them and didn't charge me for the privilege. Probably felt sorry for me :D
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
573
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
669
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
949
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
638
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
1K
invisible999
I