instantsquid

New Member

• Jan 17, 2011

• #9,041

Langers said:

does anyone have any info or tips on how I can do this? Want it as neat as possible

Click to expand...

Hahaha - do a ****ing search!

Seriously, there's hundreds of threads on here about it, or general descriptions on the interweb. Basically, you want a relay which is switched on and off from your main beam feed. Then run a fused feed from the battery through the battery to the spots. I've just finished fitting mine and I'm really pleased with the results.

 

Co-Pang-Yang

Well-Known Member

• Jan 18, 2011

• #9,042

Gonna start making a list for the MOT tonight. Doesn't run out till the end of March but rather start now incase i come up with any major problems.
What i know needs doing is:
Only one full beam (wiring problem, not getting power to one light)
No front number plate - hopefully the nice MOT man will let me get away with the stick on one i have.
Handbrake not connected - Need to take the drum apart andf clean out all the crap
Speedo not working - Sensor needed for gearbox
Bit smokey - Usually fine when warm so hopefully that won't be a problem.

Fixed the flapping wing, broken indicator and non-existant rear pads so hopefully theres nothing major to sort out.

Chris

 

drumlisden

Member

• Jan 18, 2011

• #9,043

Cut the rear chassis off from just in front of the shock absorber mounts. Have to decide now whether to put all of the new half chassis on as the outriggers are quite new. The tub is still on, propped up with some 2 by 2s. When the old chassis came off it revealed extra holes on the rear tub. A p.o. hadn't managed to line up a replacement rear cross member brackets with the existing holes so had made new ones.

 

Last edited: Jan 18, 2011

buckshot

Well-Known Member

• Jan 18, 2011

• #9,044

managed to get the bumper ground down and rubbed down and first coat of paint on it

knew there was a reason i put that brecky bar in

 

ratty

I'm not special I'm limited edition

• Jan 18, 2011

• #9,045

buckshot said:

managed to get the bumper ground down and rubbed down and first coat of paint on it

knew there was a reason i put that brecky bar in

Click to expand...

How did you mage to get away with painting that inside the house. I woulda had my knackers chopped off if I'd done that.

 

Co-Pang-Yang

Well-Known Member

• Jan 18, 2011

• #9,046

Mate built a ground anchor so went out and tested it in a quarry.
Angle isn't right so gotta be modded. Will try again next week.

 

instantsquid

New Member

• Jan 19, 2011

• #9,047

buckshot said:

managed to get the bumper ground down and rubbed down and first coat of paint on it

Click to expand...

Proper nice job that!

 

*minty*

Well-Known Member

• Jan 19, 2011

• #9,048

done fook all to any landy... but.. went to scrap yard and bought another wing mirror for me micra.....and fitted it anorl.... picces of proof.

old mirror

old one off

new one fitted

 

crashbox

Well-Known Member

• Jan 19, 2011

• #9,049

Pulled the cut off button on my Diesel Series3 and it stuck....Ive posted the rest as a question on the Series thread if you can help.

 

ratty

I'm not special I'm limited edition

• Jan 19, 2011

• #9,050

*minty* said:

done fook all to any landy... but.. went to scrap yard and bought another wing mirror for me micra.....and fitted it anorl.... picces of proof.

old mirror

old one off

new one fitted

Click to expand...

Only a woman can break the driverside mirror.

 

Co-Pang-Yang

Well-Known Member

• Jan 20, 2011

• #9,051

:lol:

 

jonstan

Member

• Jan 20, 2011

• #9,052

Took out centre front seat and replaced it with a cubby box.

 

Bromsgrove Defender

Well-Known Member

• Jan 20, 2011

• #9,053

jonstan said:

Took out centre front seat and replaced it with a cubby box.

View attachment 21034

View attachment 21035

Click to expand...

Ooooo what ya gonna do wiv yr center seat?

And please dont say put it on top of yr cubby box

 

jonstan

Member

• Jan 20, 2011

• #9,054

Bromsgrove Defender said:

Ooooo what ya gonna do wiv yr center seat?

And please dont say put it on top of yr cubby box

Click to expand...

Still want 12 seats so i'll bolt it to the roof rack.....plenty of leg room!:laugh:

 

Bromsgrove Defender

Well-Known Member

• Jan 20, 2011

• #9,055

jonstan said:

Still want 12 seats so i'll bolt it to the roof rack.....plenty of leg room!:laugh:

Click to expand...

:hysterically_laughi :hysterically_laughi

 

Big Stu 12

Well-Known Member

• Jan 20, 2011

• #9,056

jonstan said:

Still want 12 seats so i'll bolt it to the roof rack.....plenty of leg room!:laugh:

Click to expand...

:hysterically_laughi :hysterically_laughi

:nopics:

 

jonstan

Member

• Jan 20, 2011

• #9,057

I'll post a pic tomorrow, Hmmmmm double decker defender!

By the way Big Stu, Rougham looks an interesting weekend any more info on the camping?

 

Big Stu 12

Well-Known Member

• Jan 20, 2011

• #9,058

jonstan said:

By the way Big Stu, Rougham looks an interesting weekend any more info on the camping?

Click to expand...

As far as I know the camping will be the same as other times I have been to the Kite Festivals there, last couple of years been run at the same time as the 4x4, but I beleve the kites will not be there this year.... shame they a great sight, (I fly them as well - na not just diamonds, but big disply ones)

Pitch up theres chemical loos and a tap for water, skips for rubbish. as its an Airfeild quite flat as well.

The bar other times has had local brews some unusal ones as well.....

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Jan 20, 2011

• #9,059

Removed the locking wheel nuts of the Convertable Disco :d.

 

[JP]

New Member

• Jan 21, 2011

• #9,060

I've just fitted the bucket seats to the 90!

No more bouncing around on the plains! now just need to find two 4 point harnesses