Started sorting the new engine out
Admited defeat in my quest to have it on the road by tommorow morning
I then pushed it up the driveway... Which is a slope... That 110 is ****ing heavy!
 
Started to take the V8 out of my 110.
Took both props off and the top hose.
I'll have another go tomorrow:D
 
Run spotlight wires upto a on off on switch then half fitted the new overhead console

DSCF7444.jpg
[/IMG]

DSCF7446.jpg


Just hope i get it done tomorrow:)
 
Wire brushed all the exhaust bolts and then soaked em in WD40. Then I rolled over onto some nettles under the nearside and called it a day. the engine should be out by christmas at this rate:rolleyes:
Get some more done on Monday..
 
Checked all the oils on me bus (only needed a slight top up in rear diff) as ah'm feckin' off fur the weekend in it;):D
 
Repeatedly listening to my starter solonoid on mu SIII daily driver going 'click'. At the moment on average it takes about 15 attempts before it will work - ****in thing - no time to fix it at the moment either.
 
fenby1976 said:
Repeatedly listening to my starter solonoid on mu SIII daily driver going 'click'. At the moment on average it takes about 15 attempts before it will work - ****in thing - no time to fix it at the moment either.
Click to expand...

thinks i've gorra a spare solenoid if yer want it
 
Series71 said:
thinks i've gorra a spare solenoid if yer want it
Click to expand...

200Tdi one it is, gonna be a bastard to get the starter off. A fair bit of the exhaust system will have to be removed to gain access. I'm going to see if just a strip down and clean up will do the job first, but thanks for the offer:)
 
made a start on altering the rollcage i got from fleabay to fit the old bus (internal cage off a series lightweight) needed to be widened by 7" and raised by 4" managed to get it all sorted and welded up just have the chassis legs to fabricate and weld to chassis
 
Nothing today but fitted a 12v solar panel yesterday with a regulator. Not sure how well it will top up the aux battery but on special at Maplins at the mo at £39 (was about £70)
 
Today I have mostly been on my back with a wire wheel/drill, scraper and flatnose screwdriver scraping about half a ton of mud off in preperation for some Shutz tomorrow.
I have also drilled out my new sills for my rocksliders, Shutz'd my sills, front inner wing panels and inside both front wings, also fitted my Safari Snorkel to my wing.

Costs today were £20 for 2 Coveralls, 2 dustmasks, 2 pairs of goggles, 3 exhaust rubbers, a exhaust clamp and 2 wire wheels.
Also spent £100 on a Kenwood screen to run all my stereo gear ;)
 
today i have tried to take more play out of my steering box disco 1 200tdi

i did it bwt 2 months ago and its back so i av wound it to the buttom !!! then tigthend it !!

anthony
 
Drove from Dull to Redneckshire just need to get me Leaky rear brake caliper fixed now..
 
Took tunnel out and gearlever off, disconnected speedo cable and handbrake, removed cubby box and part of the seatbox beneath it and took gearbox crossmember out.
That's enough for today, just exhaust to chop off then we are ready to lift the engine and boxes out of the 110. bye bye V8 :(
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
549
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
650
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
932
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
604
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
1K
invisible999
I