landrovermilfer
Active Member
just bought a new single button fob from remote key and fitted it , . now have a set of spare keys that work for that just in case moment ....
cleaned out Sedimenter and undid front ns balljoint - can i get it out of tube - can I buggery - got soaked - called it a day 
bustersbus
Well-Known Member
Changed me top steerin' uj's twice over the last couple of days! Gave the steering shaft a wiggle and found out that the spline that comes outta the steering box moves about like ****... only fitted the bastid in Sept last year!! Was told ah only had a 6 months warranty on the soddin' thing
iannotts
New Member
Changed me top steerin' uj's twice over the last couple of days! Gave the steering shaft a wiggle and found out that the spline that comes outta the steering box moves about like ****... only fitted the bastid in Sept last year!! Was told ah only had a 6 months warranty on the soddin' thing
check ya pm's
bustersbus
Well-Known Member
gotoneatlast
New Member
pulled out tree stumps with it and used the farm jack as a winch...cool...made £100.
Removed track rod to replace balljoints.
Checked rear brakes.
topped up diff and Tbox oils.
greased UJ's and prop shafts.
tooped up windscreen washer bottle and injun fluids
adjusted handbrake and wd40'd the linkage.
Checked rear brakes.
topped up diff and Tbox oils.
greased UJ's and prop shafts.
tooped up windscreen washer bottle and injun fluids
adjusted handbrake and wd40'd the linkage.
90boy
Well-Known Member
does that count as working on the landy
Burnt Chips
New Member
Today ive welded on 2 inner arch sections on my 300 tdi,primed them,and rattle canned them back to blue, refitted all inner door trims /rubbers seatbelt holders,and sill covers, and all this when the weather man stated ive no chance of doing fookall today,Also attempted to reglue the roof lining back but alas this failed totally,so now it looks like i got to source a replacement headlining
discobill
Active Member
Got the timing sorted this morning, starts on the button now! Big thanks to Batenberg for his post... great help.
crazyjase
New Member
as promised i have learnt how the digital witchcraft camera works and then magically beamed the pictures to this contraption and hopefully you will be able to see them!
not finished yet, but these are my sides steps, the box section that i've made the sill parts and mounting legs to the chassis from is supposedly rated to 3500kg load, and the step is made of 40mm box section, about 3mm thick wall, i've got to cap the ends of the box, and i'm going to lay some catwalk into the gap flush with the box to make something to stand on.
hopefully they'll stop people banging their doors against mine, stop trees and rocks smashing my bodywork to bits while i'm playing
not finished yet, but these are my sides steps, the box section that i've made the sill parts and mounting legs to the chassis from is supposedly rated to 3500kg load, and the step is made of 40mm box section, about 3mm thick wall, i've got to cap the ends of the box, and i'm going to lay some catwalk into the gap flush with the box to make something to stand on.
hopefully they'll stop people banging their doors against mine, stop trees and rocks smashing my bodywork to bits while i'm playing
Attachments
fitted brevva extensions to both the noo disco and Tufftee (Tuffte had fishtank tubing! changed the fool filter and the air filter on the noo motor.
! changed the fool filter and the air filter on the noo motor.
