honolulujoe
Well-Known Member
fiddles with the electrics a bit more and blew some fuses 
got the headlights working, washer wiper and indicators but dash warning lights are being awkward
got the headlights working, washer wiper and indicators but dash warning lights are being awkward
viamphie
Active Member
Today a little bit of chassis painting whilst STILL waiting for my clutch plate to arrive. That's not gonna happen this weekend now is it?
Had a tinker with the fuel sender unit and ordered a new one ( broken spade connectors)
Removed and replaced clutch master and slave cylinders. Even pained the master cylinder housing. That's how bored I am waiting to put the clutch in. It looks awful in white. I'm not a very good painter [emoji15]
Finally fitted a dashboard 12v power outlet. Made to fit. 2 usb and 2 sockets.
Had a tinker with the fuel sender unit and ordered a new one ( broken spade connectors)
Removed and replaced clutch master and slave cylinders. Even pained the master cylinder housing. That's how bored I am waiting to put the clutch in. It looks awful in white. I'm not a very good painter [emoji15]
Finally fitted a dashboard 12v power outlet. Made to fit. 2 usb and 2 sockets.
Hulks
Active Member
Changed oil filter, rotor filter, air filter, oil, fixed rear led indicator, replaced rear mud flaps (previous ones were crudely cut around exhaust) (twice, didn't like the first position!!), refitted roof rack by trimming overhanging inner tube (previous owner bodged), changed all external silver screws to black! Front grill area is next!!!!
cornish rattler
Well-Known Member
Not had chance to come on the last couple of days but on Saturday i tried out my new lash down eyes i fitted a couple of weeks ago collecting timber from B n Q Stockport 6 x 3"x3"x9' length's of timber for the legs and 3 x scaffolding plank's for the worktop for my new bench my mate is making for me but need to get more timber yet
Attachments
cornish rattler
Well-Known Member
Then yesterday i went to machine mart's vat free day and bought a Clark bench drill ready for when my bench is done
honolulujoe
Well-Known Member
wired my dash indicator warning lights individually to ground on my s3 so now only one flashes on the side I am indicating.
wired the redundant cold start warning light into the heater plug circuit so now I have a nice little yellow light to let me know the key is in the glo plug position.
wired the redundant cold start warning light into the heater plug circuit so now I have a nice little yellow light to let me know the key is in the glo plug position.
tightened swivel to axle bolts, as they were loose, only to discover one was missing and one is missing a washer .
discovered under body schultz is peeling off in sheets - wtf causes that?
.discovered under body schultz is peeling off in sheets
- wtf causes that?
steveo
Well-Known Member
Cleaned off the awful mess around the breather on the rocker cover, and tightened the clips.
Fitted the second row outer seats correctly (they were on the wrong sides).
Enjoyed driving it after yesterdays fuel pump tweaks
Wondered (again) what gorilla tightened the wheel nuts, as I cannot get them undone!
Fitted the second row outer seats correctly (they were on the wrong sides).
Enjoyed driving it after yesterdays fuel pump tweaks
Wondered (again) what gorilla tightened the wheel nuts, as I cannot get them undone!
Bobsticle
De Villes Advocaat
Not had chance to come on the last couple of days but on Saturday i tried out my new lash down eyes i fitted a couple of weeks ago collecting timber from B n Q Stockport 6 x 3"x3"x9' length's of timber for the legs and 3 x scaffolding plank's for the worktop for my new bench my mate is making for me but need to get more timber yet
Tell him you want that top biscuit jointing and running through a thicknesser.
Dowelled tennons and a vice with a foot.
That should get you a fat lip................
markSX
Active Member
Gave the old girl an oil change.
Then swapped around some of my spare wheels and tyres, I now have 5 good tyres on rims.
Fixed two punctures as well.
I couldn't seat one of the tyres as my compressor is giving up, will have to take it down the garage to pump it up properly.
I'll then be able to put my road tyres back on, although they will look silly with the 2" lift, but I'll get some acceleration back.
Then swapped around some of my spare wheels and tyres, I now have 5 good tyres on rims.
Fixed two punctures as well.
I couldn't seat one of the tyres as my compressor is giving up, will have to take it down the garage to pump it up properly.
I'll then be able to put my road tyres back on, although they will look silly with the 2" lift, but I'll get some acceleration back.
