tomcat59alan · Mar 31, 2020

Henry_b said:
Hoovered it

And found the Mat for the D2 fits the P38 like a glove!!

I can't see the fingers Enery

Rubberknees · Mar 31, 2020

frog hopper said:
NAAFI - No Ambition And Feckall Interest - Sorry mate could'nt resist that one, lifesavers for a hungry thirsty young sprog as I was at the time. Many many moons ago. Said to me recently - I flew solo before Pontius was a pilot. cheeky bugger.

Love it lets keep laughing stay safe

Rubberknees · Mar 31, 2020

RangeRoller dt said:
I like the photos of the rough stuff more than the polished ones. Still not bad for its age. Any 20year old vehicle will need freshening up even the ones that don’t plough vineyards

My missis used to say I was a bit of the rough stuff. Nowadays I'm just rough

tomcat59alan · Mar 31, 2020

frog hopper said:
NAAFI - No Ambition And Feckall Interest - Sorry mate could'nt resist that one, lifesavers for a hungry thirsty young sprog as I was at the time. Many many moons ago. Said to me recently - I flew solo before Pontius was a pilot. cheeky bugger.

Now your bringing back memories, again. Never drank so many pints of orange juice in my life.My Model said they didn't have 1250's (I D cards) in your days you all knew each other. Cheeky bugger.

Dopey · Mar 31, 2020

RangeRoller dt · Mar 31, 2020

Today I have not been hoovering.
Given the amount of hay in here a baler would be more appropriate
New gearbox filler option?

Somebody has been in here before and snapped 2 supports so no need to take binnacle off

Does anybody know what this unconnected thing is under the switch pack? Can’t work out how to get the handbrake handle off to see it properly

RangeRoller dt · Mar 31, 2020

@Dopey the switch on the left is an L with a gear around it.
Is the Low Range selector

stevema · Mar 31, 2020

Today I spent 6 hours on top of 3 yesterday to clean off the old fabric from the headlining. Still not done. Awful job

Grrrrrr · Mar 31, 2020

Dopey said:
What's the button on the far left for?

Far left is low range on the manual. He's missing the cruise control switch next to it.

Kev12 · Mar 31, 2020

Took the upper tailgate catches off to free them up, only had to drill out 3 of the 4 screws

Grrrrrr · Mar 31, 2020

RangeRoller dt said:
Today I have not been hoovering.
Given the amount of hay in here a baler would be more appropriate
New gearbox filler option?View attachment 204220

Somebody has been in here before and snapped 2 supports so no need to take binnacle off View attachment 204221

Does anybody know what this unconnected thing is under the switch pack? Can’t work out how to get the handbrake handle off to see it properly View attachment 204222

Is it the wire for the non-existent sunroof?

The handbrake has a clevis pin where the cable is held. Just pop it through and it bends all the way back.

Kev12 · Mar 31, 2020

RangeRoller dt said:
Does anybody know what this unconnected thing is under the switch pack? Can’t work out how to get the handbrake handle off to see it properly

Maybe for rear cigarette lighter?

brianp38dse · Mar 31, 2020

RangeRoller dt said:
Today I have not been hoovering.
Given the amount of hay in here a baler would be more appropriate
New gearbox filler option?View attachment 204220

Somebody has been in here before and snapped 2 supports so no need to take binnacle off View attachment 204221

Does anybody know what this unconnected thing is under the switch pack? Can’t work out how to get the handbrake handle off to see it properly View attachment 204222

Some of the center consoles have a puddle light for the rear floor

the hand brake grip twists and pulls off its quite stiff

tomcat59alan · Apr 1, 2020

Dopey said:
View attachment 204223

We're doomed.

Tenebreaux · Apr 1, 2020

Transfer box oil change done. Thought I'd take a look at the low range motor while I was under there. Low has never worked since I got it, just flashes. Lots of mess around the connectors. Gonna give it a clean as soon as I can find the can of bloody contact cleaner that I KNOW I have somewhere.

stuu · Apr 1, 2020

Bought the wife a teddy while on a couple of chimney sweeps

MrSporty · Apr 1, 2020

Spent most of the day in the guts of my BeCM. Prototyping a tool which hopefully will make them a little easier to work with.

The extra grey cable snaking off to the right goes to a unit that can read and write a full backup of the BeCM settings at the push of a button.

Dopey · Apr 1, 2020

Bix · Apr 1, 2020

Broke her. Had a chirping for a few days was trying to convince myself it wasn't the TBox dying. Turns out I was right. The aux belt tensioner has failed. Shearing away from the engine. Hopefully it hasn't done any serious damage. And because the local garages round here are all closed. I actually have to do my own work again. :'(

RangeRoller dt · Apr 1, 2020

Careful with the fulcrum.
I know you know but you know we know how it is

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Sprung Member

Well-Sprung Member

Member

Technician, Bodgit & Scarper Ltd

Well-Known Member

Technician, Bodgit & Scarper Ltd

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Attachments

Well-Known Member

Loading...

Well-Sprung Member

Similar threads