brianp38dse
Well-Known Member
@gold rover ok shall stand down, safe trip back.
so you know the area round here quite well.
so you know the area round here quite well.
Jon Dor
Well-Known Member
What are the "GSD's" referred to please?@Dopey , @brianp38dse thanks guys. However, my reason for travel has now left the building. So I am going to about turn and head back to Scotland. I will just go straight to the amazing folks who are Gibsons and put her in their care.
Thank you for your offers.
Chertsey might have been fun. Last time I went their I came home with 2 GSDs
@Grrrrrr mint Series or Mk1 Cortina for me
Datatek
Well-Known Member
German Shepard Dogs
Dopey
Well-Known Member
If you ever find yourself in something larger one day, I have a safari roof I need to be delivered (one day I hope)@Dopey , @brianp38dse thanks guys. However, my reason for travel has now left the building. So I am going to about turn and head back to Scotland. I will just go straight to the amazing folks who are Gibsons and put her in their care.
Thank you for your offers.
Chertsey might have been fun. Last time I went their I came home with 2 GSDs
@Grrrrrr mint Series or Mk1 Cortina for me
Salisbury Nick
Well-Known Member
View attachment 201368 View attachment 201369 View attachment 201370
@Salisbury Nick I did! The additional is a mishimoto fan. Around 87mm thick and 460cm big. It cable tied through the rad fins with washers to share the load over the vains. It's done 1.5yrs so far and cools the rad in less than 30 secs along with the two air con fans.
Proper job. After saying I wasn't going to do it this time I was discussing it with my partner in crime at the weekend when we were finishing the oil rad move and decided that we do want to do it now, so I already have the mod' details (Thanks @Datatek ) - though I think I'll probably have a couple fo questions.
However, I was a bit concerned that I might not be able to rely on just the air con fans - and the additional fan that you have mounted is perfect. So thanks for link, I'll buy one of those and add that to the mod'.
I will probably come back to both of you with loads of annoying questions and clarifications...sorry.
Not à problemProper job. After saying I wasn't going to do it this time I was discussing it with my partner in crime at the weekend when we were finishing the oil rad move and decided that we do want to do it now, so I already have the mod' details (Thanks @Datatek ) - though I think I'll probably have a couple fo questions.
However, I was a bit concerned that I might not be able to rely on just the air con fans - and the additional fan that you have mounted is perfect. So thanks for link, I'll buy one of those and add that to the mod'.
I will probably come back to both of you with loads of annoying questions and clarifications...sorry.
goood luck
Datatek
Well-Known Member
If you fit the extra fan, you will also need to fit an additional relay with a fused feed from the battery. The relay is operated by connecting the coil across the brown and black wires of the right hand aircon fan motor.Proper job. After saying I wasn't going to do it this time I was discussing it with my partner in crime at the weekend when we were finishing the oil rad move and decided that we do want to do it now, so I already have the mod' details (Thanks @Datatek ) - though I think I'll probably have a couple fo questions.
However, I was a bit concerned that I might not be able to rely on just the air con fans - and the additional fan that you have mounted is perfect. So thanks for link, I'll buy one of those and add that to the mod'.
I will probably come back to both of you with loads of annoying questions and clarifications...sorry.
He's correct you know. Always with a fuse. I've used a 7.5 Amp which is a low amperage but I've never needed to change it up and never any overheating either.
gold rover
Well-Known Member
I would but I doubt I will be back South any time soon. Sorry.
Dopey
Well-Known Member
That's OK, I have to try! lol
Salisbury Nick
Well-Known Member
Thanks @Datatek , will do.
Salisbury Nick
Well-Known Member
So install fully charged battery clear all “ bongs” sync keys and check all is good.
Well that’s the Green monster MOTed for another year
It’s surprising the difference getting back in the P38 after a few months of not using, and only being in the 322.
Still had fun though, visited fuel station and took the long way home to streeeach the legs a bit
Was even brave enough to switch to low box for a bit of a test and back with no issues.
Also was reminded I need to order that new tensioner wheel as the budgies seem to be multiplying.
J
Well that’s the Green monster MOTed for another year
It’s surprising the difference getting back in the P38 after a few months of not using, and only being in the 322.
Still had fun though, visited fuel station and took the long way home to streeeach the legs a bit
Was even brave enough to switch to low box for a bit of a test and back with no issues
.Also was reminded I need to order that new tensioner wheel as the budgies seem to be multiplying.
J
tomcat59alan
Well-Known Member
Attached maintenance charger.
Attached maintenance charger.
Off to the sun again? It's a hard life for the silver surfers!
tomcat59alan
Well-Known Member
Yup, it's not all sitting in the sun, there is maintenance to be done, at least it's in shorts .
Yup, it's not all sitting in the sun, there is maintenance to be done, at least it's in shorts .
Yes, those wines aren't going to test themselves and without testing who knows which ones are good?
Jon Dor
Well-Known Member
Have a wonderful holiday Alan and keep away from any nasty viruses Not sure the Canaries are up to seeing your knees...bit difficult hiding them in yer best Tutu thoughYup, it's not all sitting in the sun, there is maintenance to be done, at least it's in shorts .
