gold rover
Well-Known Member
I'll try it with mine tomorrow and see what happens. Oh hang on I don't know where you used to live
In my old house. Tell me what happens tomorrow
In my old house. Tell me what happens tomorrow
Hurray and bugger at the same time, might be lucky if bit left sticking out the head (manifold off again) to grip it enough to turn it out or weld a nut on it then turn it out or if it comes to drilling it out try and find a bit of tube that just fits in manifold hole then a drill bit that just fits in the tube to make a guide bush it will center the drill bit in the broken stud.Back in the realm of P38 driver, instead of just owner
Starter came - is on, injectors, manifold, clear pipe mutilated. Static timing set
It runs!
Spills pi** everywhere but that’s usual for all of us at some point
I have been up to my usual though
It should be okay, one shouldn’t hurt?
View attachment 183310
Touch like a blacksmith
RangeRoller dt
Well-Sprung Member
In my old house. Tell me what happens tomorrow
That's the problem, I don't know where your old house is
gold rover
Well-Known Member
It's over thereThat's the problem, I don't know where your old house is
Where it's always been.
Ah ok, I'll let you know tomorrow
gold rover
Well-Known Member
Oh hang on. From your house it might be over there 
Its in the street where the young lady use to live of course.That's the problem, I don't know where your old house is
If you know somebody with a lathe its a two minute job to make a bush.Clever
Ok I'll try both ways and see what happens. Failing that I'll try setting it to where I used to live.
gold rover
Well-Known Member
Oooooo good thinking.
RangeRoller dt
Well-Sprung Member
Off top of my head think they are 8mm so bit of studding will do or if near breakers yard lot of cars use same size studs just find one with right length. (thinking of the cost for you lol)
Back in the realm of P38 driver, instead of just owner
Starter came - is on, injectors, manifold, clear pipe mutilated. Static timing set
It runs!
Spills pi** everywhere but that’s usual for all of us at some point
I have been up to my usual though
It should be okay, one shouldn’t hurt?
View attachment 183310
Touch like a blacksmith
If you take the manifold off is there enough left to get hold of to unscrew?
RangeRoller dt
Well-Sprung Member
Should be.
It won’t come off for while unless it leaks, was lucky with gaskets last time.
Stupid leak off pipes!!
Two years down the line and one leak off pipe has piddled diesel down the block!! I hate leaks and mine doesn't!! Not now I've replaced it... And the rest to follow..... Drove it with the Aircon on down the motorway at seventy... It was absolutely brilliant!! And then there is tomorrow as well to look forward too.
Two years down the line and one leak off pipe has piddled diesel down the block!! I hate leaks and mine doesn't!! Not now I've replaced it... And the rest to follow..... Drove it with the Aircon on down the motorway at seventy... It was absolutely brilliant!! And then there is tomorrow as well to look forward too.
23108924
Well-Known Member
RangeRoller dt
Well-Sprung Member
Nah he's on coils. That don't work
You grassed him up!! He’s kept that one quiet Turns out I’m not the only heretic here, just the honest one
