Battered Mars bars.?;)
Hell no! Much more stupid than that ;) Fried egg roll from a burger van. Waiting for results to see if it's salmonella or e.coli . Still ill almost a week later and all I can think is 'I hope the car starts, when i finally get out'.
 
Last edited:
took it for an MOT. passed.

advisory of slight play on upper ball joints.

what a ball ache !
Not a bad job Adam, as long as the abs sensors haven't siezed. Best do top and bottom while its stripped down. You have to remove one to get access to the other, cannot remember which it is. Pity your not closer, I bought the press kit when I did mine . Put the joints in the freezer for 24 hrs before fitting,
 
He'll no! Much more stupid than that ;) Fried egg roll from a burger van. Waiting for results to see if it's salmonella or e.coli . Still ill almost a week later and all I can think is 'I hope the car starts, when i finally get out'.
Hope you get better soon, and she starts:D
 
IMG_20180404_160234.jpg

Went from the one on the left to the one on the right. Nice..
 
Not a bad job Adam, as long as the abs sensors haven't siezed. Best do top and bottom while its stripped down. You have to remove one to get access to the other, cannot remember which it is. Pity your not closer, I bought the press kit when I did mine . Put the joints in the freezer for 24 hrs before fitting,
that's very decent of you TCA. aside from doing both top and bottom i think it would be worthwhile doing all the bushes at the same time. i figure it will need the tracking set up again after the ball joints so might as well do them all !

if you want to move closer you're perfectly welcome.. not just to lend me the press tool but pitch in too !
 
Who? Me? Never?:D :p:D

Soldiering on , thanks. Getting slightly betterer but Dr still not happy and awaiting results. I've always known I was a public health hazard ;)
Surly not a public health hazard, just a glutton for punishment:p... Range rovers and burger vans!!!:eek::)
 
Here's the headlining pics.. after of course..

Thanks to Dopey for the walk through in the tech archive
 

Attachments

  • 20180406_155500.jpg
    20180406_155500.jpg
    111.6 KB · Views: 158
  • 20180406_155442.jpg
    20180406_155442.jpg
    150 KB · Views: 121
  • 20180406_155529.jpg
    20180406_155529.jpg
    335.7 KB · Views: 105
Surly not a public health hazard, just a glutton for punishment:p... Range rovers and burger vans!!!:eek::)
Hmmmm there is that. But on a serious note, if it's one of the big 4 they have to tell the health board! At least with the RR I don't need to announce I'm a glutton for punishment. People just know :D
 
that's very decent of you TCA. aside from doing both top and bottom i think it would be worthwhile doing all the bushes at the same time. i figure it will need the tracking set up again after the ball joints so might as well do them all !

if you want to move closer you're perfectly welcome.. not just to lend me the press tool but pitch in too !
I would tow the tin tent down but I cannot drive for another 5 months, not that I'm counting.;)
 
Oil and filters changed. Wiper blades changed too ready for the MoT test on Monday. Rear wiper arm had seized where the hinge is. Took a lot of wriggling with WD40 to get it to move. Put some 3-in-1 on it to try and keep it free but wondering if maybe some grease might be a better idea?
 
Not a bad job Adam, as long as the abs sensors haven't siezed. Best do top and bottom while its stripped down. You have to remove one to get access to the other, cannot remember which it is. Pity your not closer, I bought the press kit when I did mine . Put the joints in the freezer for 24 hrs before fitting,
And go for the lemforder ones.
 

Similar threads