Changed the diff-oil. Slight creamyness which I assume was due to water ingress during the wading last weekend?

Reversing light bulb swapped. Filament looked OK but didn't work either side. Replaced with heavy duty bulbs which have an extra support in the middle of the filament.
 
well ive got time to my self today so i thought i would take some dents out off my own car today. instead of everyone else,s 5 little dents and one very hard to get at dent ill post pictures later.of how its goes. i find range rovers a bit harder to do with them having thicker skins than most cars and ali. this dent will be different. than the every day ones i get week in week out.
 

Attachments

  • rangey dent 1.jpg
    rangey dent 1.jpg
    31 KB · Views: 127
Last edited:
philip pickard said:
well ive got time to my self today so i thought i would take some dents out off my own car today. instead of everyone else,s 5 little dents and one very hard to get at dent ill post pictures later.of how its goes. i find range rovers a bit harder to do with them having thicker skins than most.
Click to expand...

I dont think its Range Rovers that have thicker skins but its the owners that have thicker skins
 
Grrrrrr said:
Changed the diff-oil. Slight creamyness which I assume was due to water ingress during the wading last weekend?

Reversing light bulb swapped. Filament looked OK but didn't work either side. Replaced with heavy duty bulbs which have an extra support in the middle of the filament.
Click to expand...
Did you put a bung in the gearbox? if you didn't the grit sand dirt will slowly grind all the cogs down it will take some time depending on how much crud is in there, but changing your gearbox oil is a must.... dont ask how I know, lucky my box was under insurance and I got a new one
 
Dopey said:
Did you put a bung in the gearbox? if you didn't the grit sand dirt will slowly grind all the cogs down it will take some time depending on how much crud is in there, but changing your gearbox oil is a must.... dont ask how I know, lucky my box was under insurance and I got a new one
Click to expand...

Bung in the gearbox?!
 
I think there's a air breather some place, and water can get into the gearbox, thats what happened to me, it at the front near the flywheel on my series 2
 
Dopey said:
I think there's a air breather some place, and water can get into the gearbox, thats what happened to me, it at the front near the flywheel on my series 2
Click to expand...

I was planning on replacing the oil anyway but don't think I have enough left for a full change. :(
 
Took off both bonnet latches, put in parts washer to dissolve 17 years of grime, moved to ultrasonic cleaner to remove parts washer solvent.

Small dab of silicon grease, and re-fitted looking like new. Got rid of the "bonnet open" warning which was driving me nuts.
 
Fitted new wipers all round the rear one was really bad the fronts not great but what a change I can see in the rain. Then fitted leather handbrake and auto gear lever looks better in there now. She has the outside facelift now most of the inside is getting there too
 
Changed the oil in the gearbox.

The MTF94 from Smith & Allan isn't as thick as the stuff from Land Rover. Sounded OK on the test drive but I don't think it'll last as long.
 
Typical I go into hospital have 3 stents put in, come out and find my rdr suspension won't go up now, I just can't do it right now I will wait a few days and try looking at it then if I feel better
 
YOU SHOULD REST UP FOR MORE THAN A FEW DAYS SO YOUR STENTS CAN SETTLE IN' AS FOR MY RANGY I WENT TO SEE A MATE AND THE GARAGE NEXT DOOR HAS A RANGY SPORT ON THE RAMP. SO I WALKED OVER TO SEE AND THE FRONT IS SMASHED OFF. SO I ASKED WHAT HE WAS GOING TO DO WITH IT. HE SAID HE WAS GOING TO STRAIGHTEN THE CHASSE AND THEN PUT NEW WINGS ON!!!, I LOOKED AND SAID WHAT ABOUT THE LITTLE ecu THAT FITS IN THE CROSS MEMBER THAT HE HASNT GOT YET. AND ALL THE PIPES FOR THE AIR SUS, AND THE CUT WIRES GOING TO IT. HE JUST LOOKED AT ME, IN A FUNNY WAY. HE DIDNT HAVE A CLUE SO I OFFERED HIM 3 GRAND the same as what he had payed for it
TO TAKE IT OFF HIS HANDS IF HE COULDNT SORT IT. ITS AN 2.7 TDV6 07
 
Last edited:
sent off for a regulator unit with a 14.7 set point and new exhaust system, jobs for next week when they arrive.
@Dopey if your stuck give us a shout I can have a look at the eas.
 
Last edited:
I decided to purchase some Gen Yoo Ayne LR pollen filters for George.

Picked them up the other day and fitted them last night.

Can you spot the difference boys and girls?



and the ones the immigrant mice had set up a temporary camp in...




Jeez, no wonder the cabin smelled like a farmers boot :D

Now I just have to figure out how to work the stupid fan controls. It's like something from original Star Trek, all flashing and blinking for no real purpose other than to look futuristic o_O

When I turn the blower dial for more speed, I can almost hear Scotty shouting, "If I give her any more captain, she'll blow! The Dilithium Crystals are almost done...!"

It does it's own thing. Will a contact cleaner help if I dismantle it and give it a spray then chaps?
 
You must log in or register to reply here.

Similar threads

A
Range Rover L322 - not turning over
Replies
12
Views
2K
gold rover
gold rover
B
L320 range rover sport 3.0 tdv6 loosing power steering fluid
Replies
3
Views
540
Mark Piercy
Mark Piercy
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
T
Non start
Replies
3
Views
717
Datatek
Datatek
T
Fan Clutch??
Replies
14
Views
801
Grrrrrr
Grrrrrr