Druim
Well-Known Member
:nopics:
Rob4x40
Active Member
Got to car tonight in work car park only to find remote unlock didn't work. Both fobs recently refurbished and LED was flashing but to no effect from any angle/location. Uh-oh - flat battery? Gingerly opened drivers door with key, lights were in off position and ignition barrel was illuminated so key in ignition and turned... Click of central locking as other doors unlocked and... she started perfectly as always! Didn't dare turn off, so waited until I got home - locks and unlocks on the fob perfectly now.
'She' is definitely female... :scratching_chin:
'She' is definitely female... :scratching_chin:
mutsnutz
Well-Known Member
same happened to me sprayed some graphite grease into door and ingnition locks and no probs since touch wood think ignition lock was sticking
Littelwill
Well-Known Member
Checked tyre pressures today bit dull but needed to play with it some how 
Rob4x40
Active Member
JohnnyCrash
New Member
Bought a Crank Position Sensor, will have to wait until tomorrow to fit it though :-(
Parisien
New Member
...looks third time lucky.......TNT deliveries have taken ineptness to a whole new level.....fingers Xed for Monday
P
3extruckers
Active Member
Fit winch, roof rack and bull bar.
Druim
Well-Known Member
:nopics:
jonesavpman
New Member
Fitted 2000 model rear lights :biggrin1: ( look soooo much better than the original orange ones!!) Changed diff oil,replaced gearbox filter and oil, was very puzzled when undoing sump plug that only a drip came out !! Thinking to myself how is the car diving without any gearbox oil? i undid the filler plug which then proceeded to dump oil all over the drive!!! found the magnet in the sump sat squarely over the drain hole!!:doh: All back together now and seems to be driving fine. will be checking oil level again in the morning, when i grease the props!! Hope its not raining!!
!! Thinking to myself how is the car diving without any gearbox oil? i undid the filler plug which then proceeded to dump oil all over the drive!!! found the magnet in the sump sat squarely over the drain hole!!:doh: All back together now and seems to be driving fine. will be checking oil level again in the morning, when i grease the props!! Hope its not raining!!
jonesavpman
New Member
Greased her props, finally got round to drilling out the rear bumper bolt that i sheared off last year while fitting a tow bar, bumper is nice and straight again!!! Fitted a new bulb to the collar around the ignition switch, lights up at last! Sprayed the light guards and grill matt black,sure looks better than the various shades of grey they were!
All in all a productive day, and a lovely day it was for a bit of tinkering, now for a well deserved beer or two :beer2:
All in all a productive day, and a lovely day it was for a bit of tinkering, now for a well deserved beer or two :beer2:
Attachments
Druim
Well-Known Member
Looks goodGreased her props, finally got round to drilling out the rear bumper bolt that i sheared off last year while fitting a tow bar, bumper is nice and straight again!!! Fitted a new bulb to the collar around the ignition switch, lights up at last! Sprayed the light guards and grill matt black,sure looks better than the various shades of grey they were!
All in all a productive day, and a lovely day it was for a bit of tinkering, now for a well deserved beer or two :beer2:
which primer did you use
jonesavpman
New Member
I used a no brand (cheapo) 'no primer needed' plastic spray paint, the finish isnt as good as id like so might rub them down and do it again proper over the summer. ( if we have one )
