Mine did itIts a feature on some Mine does it. We must be the posh ones Chris
Mine did itIts a feature on some Mine does it. We must be the posh ones Chris
I'll have to check that outThere's a wiper speed option in nanocom, not sure what it does though but you can enable or disable
Neither of mine do it and one is a DHSE, I think it's a feature that can be activated in the BECM, I'll have to take a look.Don’t think mine does but it’s a DT not DHT lol
Well there’s spare fronts on my vehicle if you need them. Never been bothered about collateral damage
View attachment 260330
Problem was bolts holding them in would spin and spin but not budge. Couldn’t fit the angle grinder in there and you know what I’m like for lack of proper tools. If you got a little cutter can get in there would probably be okay just slice the heads off the bolts
There's a wiper speed option in nanocom, not sure what it does though but you can enable or disable
Height sensors came off easily on mine, even on the 95 scrapper that has been stood in the rain for years.Best I have is a junior hackaw.
Junior saw probably won’t fit - maybe just the blade with a wooden handle strapped on?
Rear wiper operates when selecting reverse on mine too
Gates Spill pipe free from Tomcat has arrived. Superior quality to the stuff I’ve been using says 3.2 internal but looks tighter just like Alan likes it can’t see me needing to change this again. Hopefully this weekend I will have thechanceweather to swap it out, flush intercooler, fit the new hoses and check out my turbo/exh manifold as something going on under that shield
Gone bit far for that now I’ve chopped too much. Yet, there’s few P38s trundling around on EAS been saved in the processleave them there for when you put it back on air.
So, I managed to crawl under the scrapper to remove a front sensor, waste of time, too much work required to make a mounting plate etc in the hope that a 27 year old sensor might work. Found a supply of what I think are Chinese knock offs at a less outrageous price than normal. Aliexpress have them for €21 if you can wait for about 8 weeks for delivery.
Glad you got it Jack, the post has been a nightmare I ordered a seal kit for the FIP supposed to be 5 working days delivery Not from a big multinational but from a flat down souf eventually arrived 12 days after ordering.at least the lady I emailed had he decency to give me a full refund.Junior saw probably won’t fit - maybe just the blade with a wooden handle strapped on? Or remove shocks
Rear wiper operates when selecting reverse on mine too
Gates Spill pipe free from Tomcat has arrived. Superior quality to the stuff I’ve been using says 3.2 internal but looks tighter just like Alan likes it can’t see me needing to change this again. Hopefully this weekend I will have thechanceweather to swap it out, flush intercooler, fit the new hoses and check out my turbo/exh manifold as something going on under that shield
Glad you got it Jack, the post has been a nightmare I ordered a seal kit for the FIP supposed to be 5 working days delivery Not from a big multinational but from a flat down souf eventually arrived 12 days after ordering.at least the lady I emailed had he decency to give me a full refund.
I think the terms driver/passenger side can be cofusing, left/right is universal, as viewed fromsilly question, is bank1, passenger side (1,3,5,7) the left or right hand bank? assume its left?
My old rocker shaft had left and right rockers on it, no wonder if was knackeredI think the terms driver/passenger side can be cofusing, left/right is universal, as viewed from behind the wheel/facing forward.
Bloody hellMy old rocker shaft had left and right rockers on it, no wonder if was knackered
not sure how it affects oil flow though as the shaft is not sided so shouldnt make any differenceBloody hell
I am doubting myself now, having never had the need to remove a rocker cover on a RV8, could they be handed for inlet/exhaust?not sure how it affects oil flow though as the shaft is not sided so shouldnt make any difference
When you buy rockers, you have a choice of LH or RH, no mention of inlet or exhaust.I am doubting myself now, having never had the need to remove a rocker cover on a RV8, could they be handed for inlet/exhaust?